I have a Alix 2c3 with three ethernet ports.. .eth0, eth1, eth2. I have
eth0 setup as the WAN port connected to cable modem, and eth1 as the LAN
port.
Is it possible to configure eth2 such that it is just like having a ethernet
switch... in other words eth1 and eth2 are on the same subnet, both have,
for example, 192.168.1.1 as their address, and any computers connected to
either port could communicate with any other computer on the other port...
plus of course, NAT through to the WAN on eth0.
Thanks,
David
------------------------------------------------------------------------------
Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
easily build your RIAs with Flex Builder, the Eclipse(TM)based development
software that enables intelligent coding and step-through debugging.
Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
_______________________________________________
Astlinux-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
[email protected].
