If you are using the web interface, in the Advanced User Variables add as Philip suggests,
BRIDGE1="eth1 eth2" then reboot, followed in the Network tab, Internal Interfaces, select "br1" from the menu. then reboot one more time to apply the last Network change. Of course, this acts like a "hub" rather than a "switch'. Lonnie On Mar 15, 2009, at 1:07 PM, Philip A. Prindeville wrote: > BRIDGE1="eth1 eth3" > INTIF="br1" > > > (You can also use BRIDGE0 and br0, but I prefer to reserve br0 for > debugging WAN traffic...) > > > David Kerr wrote: >> I have a Alix 2c3 with three ethernet ports.. .eth0, eth1, eth2. I >> have eth0 setup as the WAN port connected to cable modem, and eth1 as >> the LAN port. >> >> Is it possible to configure eth2 such that it is just like having a >> ethernet switch... in other words eth1 and eth2 are on the same >> subnet, both have, for example, 192.168.1.1 as their address, and any >> computers connected to either port could communicate with any other >> computer on the other port... plus of course, NAT through to the WAN >> on eth0. >> >> Thanks, >> David >> > > > ------------------------------------------------------------------------------ > Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) > are > powering Web 2.0 with engaging, cross-platform capabilities. Quickly > and > easily build your RIAs with Flex Builder, the Eclipse(TM)based > development > software that enables intelligent coding and step-through debugging. > Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com > _______________________________________________ > Astlinux-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/astlinux-users > > Donations to support AstLinux are graciously accepted via PayPal to > [email protected] > . > > ------------------------------------------------------------------------------ Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com _______________________________________________ Astlinux-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [email protected].
