BRIDGE1="eth1 eth3" INTIF="br1"
(You can also use BRIDGE0 and br0, but I prefer to reserve br0 for debugging WAN traffic...) David Kerr wrote: > I have a Alix 2c3 with three ethernet ports.. .eth0, eth1, eth2. I > have eth0 setup as the WAN port connected to cable modem, and eth1 as > the LAN port. > > Is it possible to configure eth2 such that it is just like having a > ethernet switch... in other words eth1 and eth2 are on the same > subnet, both have, for example, 192.168.1.1 as their address, and any > computers connected to either port could communicate with any other > computer on the other port... plus of course, NAT through to the WAN > on eth0. > > Thanks, > David > ------------------------------------------------------------------------------ Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com _______________________________________________ Astlinux-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [email protected].
