Hi, You're great! working perfectly also for me:
||||| | A | Release: astlinux-1.4-4806-e5d33e - Asterisk 13.34.0 | s | Host Name: | t | Last Boot: 2020-08-30 12:38 | L | Linux: 4.19.140-astlinux x86_64 | i | CPU: Intel Atom N2800 (4x) @ 1866 MHz | n | RAM: 1983 MB | u | Board Type: genx86_64 | x | Hardware: Generic x86_64 ||||| [ 24.405610] dahdi: Version: 3.1.0 [ 24.409381] dahdi: Telephony Interface Registered on major 196 [ 24.435136] No freshmaker chip [ 25.149448] Module 0: Installed -- AUTO FXO (SPAIN mode) [ 25.635354] Module 1: Installed -- AUTO FXS/DPO [ 25.719428] Excessive leakage detected on module 2: 1 volts (03) after 34 ms [ 25.719490] ProSLIC module 2 failed leakage test. Check for short circuit [ 26.126341] Module 2: Installed -- AUTO FXS/DPO [ 26.126752] Module 3: Not installed [ 26.136305] Found a Wildcard TDM: Wildcard TDM400P REV I (3 modules) [ 26.182717] dahdi_echocan_oslec: Registered echo canceler 'OSLEC' [ 44.144753] ioctl: Start OnHookTrans, card 1 [ 45.064225] ioctl: Start OnHookTrans, card 2 There are some leakage warnings on one of the modules but seem unrelated to the driver. Thanks again and regards. ________________________________ On Aug 29, 2020, at 6:56 PM, Lonnie Abelbeck <li...@lonnie.abelbeck.com<mailto:li...@lonnie.abelbeck.com>> wrote: Hi Ionel and Gonzalo, I patched the dahdi-linux build to include PCI card support for: wctdm24xxp, wctdm and wcfxo It now needs testing ... there is a new Pre-Release Version: astlinux-1.4-4806-e5d33e Info: https://www.astlinux-project.org/dev.html With the console port, use the CLI to upgrade via the appropriate Pre-Release Repository URL for your Asterisk version. If you want to, revert back to your previous image with "upgrade-run-image revert" and "kernel-reboot" CLI commands. In theory, it should just work. Please post your test results here. Lonnie
_______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
