Thanks Ionel and Gonzalo, Perfect, your prompt reply to this query and your followup testing is a big help to the AstLinux Project.
Lonnie > On Aug 30, 2020, at 5:56 AM, Gonzalo Ibáñez <goniba...@hotmail.com> wrote: > > Hi, > > You're great! working perfectly also for me: > > > ||||| > | A | Release: astlinux-1.4-4806-e5d33e - Asterisk 13.34.0 > | s | Host Name: > | t | Last Boot: 2020-08-30 12:38 > | L | Linux: 4.19.140-astlinux x86_64 > | i | CPU: Intel Atom N2800 (4x) @ 1866 MHz > | n | RAM: 1983 MB > | u | Board Type: genx86_64 > | x | Hardware: Generic x86_64 > ||||| > > > [ 24.405610] dahdi: Version: 3.1.0 > [ 24.409381] dahdi: Telephony Interface Registered on major 196 > [ 24.435136] No freshmaker chip > [ 25.149448] Module 0: Installed -- AUTO FXO (SPAIN mode) > [ 25.635354] Module 1: Installed -- AUTO FXS/DPO > [ 25.719428] Excessive leakage detected on module 2: 1 volts (03) after 34 > ms > [ 25.719490] ProSLIC module 2 failed leakage test. Check for short circuit > [ 26.126341] Module 2: Installed -- AUTO FXS/DPO > [ 26.126752] Module 3: Not installed > [ 26.136305] Found a Wildcard TDM: Wildcard TDM400P REV I (3 modules) > [ 26.182717] dahdi_echocan_oslec: Registered echo canceler 'OSLEC' > [ 44.144753] ioctl: Start OnHookTrans, card 1 > [ 45.064225] ioctl: Start OnHookTrans, card 2 > > There are some leakage warnings on one of the modules but seem unrelated to > the driver. > > Thanks again and regards. > > > On Aug 29, 2020, at 6:56 PM, Lonnie Abelbeck <li...@lonnie.abelbeck.com> > wrote: >> >> Hi Ionel and Gonzalo, >> >> I patched the dahdi-linux build to include PCI card support for: wctdm24xxp, >> wctdm and wcfxo >> >> It now needs testing ... there is a new Pre-Release Version: >> astlinux-1.4-4806-e5d33e >> >> Info: >> https://www.astlinux-project.org/dev.html >> >> With the console port, use the CLI to upgrade via the appropriate >> Pre-Release Repository URL for your Asterisk version. >> >> If you want to, revert back to your previous image with "upgrade-run-image >> revert" and "kernel-reboot" CLI commands. >> >> In theory, it should just work. >> >> Please post your test results here. >> >> Lonnie _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
