Hi Gonzalo, Thanks very much for the timely testing.
Great results. Perfect. Lonnie > On Dec 30, 2022, at 4:54 PM, Gonzalo Ibáñez <goniba...@hotmail.com> wrote: > > Hi, > > So far so good, everything ok and sound quality from/to analog lines is ok: > > ||||| > | A | Release: astlinux-1.5-5689-b4e39c - Asterisk 18.15.1 > | s | Host Name: > | t | Last Boot: 2022-12-30 21:26 > | L | Linux: 5.10.158-astlinux x86_64 > | i | CPU: Intel Atom N2800 (4x) @ 1866 MHz > | n | RAM: 1982 MB > | u | Board Type: genx86_64 > | x | Hardware: Generic x86_64 > ||||| > > [ 16.650210] dahdi: loading out-of-tree module taints kernel. > [ 16.652463] dahdi: Version: 3.2.0 > [ 16.653220] dahdi: Telephony Interface Registered on major 196 > [ 16.679708] No freshmaker chip > [ 17.400332] Module 0: Installed -- AUTO FXO (SPAIN mode) > [ 17.888371] Module 1: Installed -- AUTO FXS/DPO > [ 18.389722] Module 2: Installed -- AUTO FXS/DPO > [ 18.390139] Module 3: Not installed > [ 18.392192] Found a Wildcard TDM: Wildcard TDM400P REV I (3 modules) > [ 18.441892] dahdi_echocan_oslec: Registered echo canceler 'OSLEC' > [ 38.318682] ioctl: Start OnHookTrans, card 1 > [ 38.959017] ioctl: Start OnHookTrans, card 2 > > # lsdahdi > ### Span 1: WCTDM/4 "Wildcard TDM400P REV I Board 5" (MASTER) > 1 FXO FXSKS (In use) (EC: OSLEC - INACTIVE) > 2 FXS FXOKS (In use) (EC: OSLEC - INACTIVE) > 3 FXS FXOKS (In use) (EC: OSLEC - INACTIVE) > 4 unknown Reserved > > # asterisk -rx "dahdi show status" > Description Alarms IRQ bpviol CRC Fra > Codi Options LBO > Wildcard TDM400P REV I Board 5 OK 0 0 0 CAS Unk > 0 db (CSU)/0-133 feet (DSX-1) > > > Thanks again and a happy new year to everybody. > > Regards. > De: Ionel Chila <ionelch...@mac.com> > Enviado: viernes, 30 de diciembre de 2022 21:10 > Para: Lonnie Abelbeck <li...@lonnie.abelbeck.com> > Cc: AstLinux Users Mailing List <astlinux-users@lists.sourceforge.net>; > Gonzalo Ibáñez <goniba...@hotmail.com> > Asunto: Re: DAHDI cards and AstLinux 1.5.x testing > > Lonnie, > > First of all Merry Christmas and Happy New Year. As always you’re being > awesome and thanks for thinking of us through this upgrade process as well > thanks for working so hard through your holidays. > > I can confirm that everything works perfect after this upgrade Sir. Should I > stay on this version or reverse back and wait for the official release? > > THANKS again Sir > > > > <Screenshot 2022-12-30 at 2.07.54 PM.png> > <Screenshot 2022-12-30 at 2.06.55 PM.png> > <Screenshot 2022-12-30 at 2.04.49 PM.png> > > > > > > > > On Dec 30, 2022, at 1:18 PM, Lonnie Abelbeck <li...@lonnie.abelbeck.com> > > wrote: > > > > Hi ... specially Ionel and Gonzalo (or others) for DAHDI testing. > > > > You previously tested the AstLinux 1.4.x series with DAHDI 3.1.0, at that > > time we patched dahdi-linux to include PCI card support for: wctdm24xxp, > > wctdm and wcfxo > > > > Gonzalo indicated it worked: > > -- > >> ||||| > >> | A | Release: astlinux-1.4-4806-e5d33e - Asterisk 13.34.0 > >> | s | Host Name: > >> | t | Last Boot: 2020-08-30 12:38 > >> | L | Linux: 4.19.140-astlinux x86_64 > >> | i | CPU: Intel Atom N2800 (4x) @ 1866 MHz > >> | n | RAM: 1983 MB > >> | u | Board Type: genx86_64 > >> | x | Hardware: Generic x86_64 > >> ||||| > >> > >> > >> [ 24.405610] dahdi: Version: 3.1.0 > >> [ 24.409381] dahdi: Telephony Interface Registered on major 196 > >> [ 24.435136] No freshmaker chip > >> [ 25.149448] Module 0: Installed -- AUTO FXO (SPAIN mode) > >> [ 25.635354] Module 1: Installed -- AUTO FXS/DPO > >> [ 25.719428] Excessive leakage detected on module 2: 1 volts (03) after > >> 34 ms > >> [ 25.719490] ProSLIC module 2 failed leakage test. Check for short > >> circuit > >> [ 26.126341] Module 2: Installed -- AUTO FXS/DPO > >> [ 26.126752] Module 3: Not installed > >> [ 26.136305] Found a Wildcard TDM: Wildcard TDM400P REV I (3 modules) > >> [ 26.182717] dahdi_echocan_oslec: Registered echo canceler 'OSLEC' > >> [ 44.144753] ioctl: Start OnHookTrans, card 1 > >> [ 45.064225] ioctl: Start OnHookTrans, card 2 > > -- > > > > > > It is more than 2 years later and the AstLinux Team is working on the > > AstLinux 1.5.x series with DAHDI 3.2.0 and Linux Kernel 5.10.y, we have > > included the same patches to maintain PCI card support for: wctdm24xxp, > > wctdm and wcfxo > > > > While the Linux Kernel 5.10.y drivers build properly, we have no way to > > test if things still work using those cards. > > > > > > It now needs testing ... there is a new Pre-Release Version: > > astlinux-1.5-5689-b4e39c > > > > Info: > > https://www.astlinux-project.org/dev.html > > > > With the console, use the CLI to upgrade via the appropriate Pre-Release > > Repository URL for your Asterisk version. > > > > If you want to, revert back to your previous image with "upgrade-run-image > > revert" and "kernel-reboot" CLI commands. > > > > In theory, it should just work. > > > > Please post your test results here. > > > > Thanks! > > > > Lonnie > > _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
