Thanks Lonnie for not forgetting us the analogue ones! :-) I'll test it and give you feedback on this thread in a week or so.
Regards. El 30 de diciembre de 2022 19:18:43 UTC, Lonnie Abelbeck <li...@lonnie.abelbeck.com> escribió: >Hi ... specially Ionel and Gonzalo (or others) for DAHDI testing. > >You previously tested the AstLinux 1.4.x series with DAHDI 3.1.0, at that time >we patched dahdi-linux to include PCI card support for: wctdm24xxp, wctdm and >wcfxo > >Gonzalo indicated it worked: >-- >> ||||| >> | A | Release: astlinux-1.4-4806-e5d33e - Asterisk 13.34.0 >> | s | Host Name: >> | t | Last Boot: 2020-08-30 12:38 >> | L | Linux: 4.19.140-astlinux x86_64 >> | i | CPU: Intel Atom N2800 (4x) @ 1866 MHz >> | n | RAM: 1983 MB >> | u | Board Type: genx86_64 >> | x | Hardware: Generic x86_64 >> ||||| >> >> >> [ 24.405610] dahdi: Version: 3.1.0 >> [ 24.409381] dahdi: Telephony Interface Registered on major 196 >> [ 24.435136] No freshmaker chip >> [ 25.149448] Module 0: Installed -- AUTO FXO (SPAIN mode) >> [ 25.635354] Module 1: Installed -- AUTO FXS/DPO >> [ 25.719428] Excessive leakage detected on module 2: 1 volts (03) after 34 >> ms >> [ 25.719490] ProSLIC module 2 failed leakage test. Check for short circuit >> [ 26.126341] Module 2: Installed -- AUTO FXS/DPO >> [ 26.126752] Module 3: Not installed >> [ 26.136305] Found a Wildcard TDM: Wildcard TDM400P REV I (3 modules) >> [ 26.182717] dahdi_echocan_oslec: Registered echo canceler 'OSLEC' >> [ 44.144753] ioctl: Start OnHookTrans, card 1 >> [ 45.064225] ioctl: Start OnHookTrans, card 2 >-- > > >It is more than 2 years later and the AstLinux Team is working on the AstLinux >1.5.x series with DAHDI 3.2.0 and Linux Kernel 5.10.y, we have included the >same patches to maintain PCI card support for: wctdm24xxp, wctdm and wcfxo > >While the Linux Kernel 5.10.y drivers build properly, we have no way to test >if things still work using those cards. > > >It now needs testing ... there is a new Pre-Release Version: >astlinux-1.5-5689-b4e39c > >Info: >https://www.astlinux-project.org/dev.html > >With the console, use the CLI to upgrade via the appropriate Pre-Release >Repository URL for your Asterisk version. > >If you want to, revert back to your previous image with "upgrade-run-image >revert" and "kernel-reboot" CLI commands. > >In theory, it should just work. > >Please post your test results here. > >Thanks! > >Lonnie >
_______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
