Sven Eckelmann <[email protected]> writes: > On Donnerstag, 19. April 2018 10:20:41 CEST Kalle Valo wrote: > [...] >> > - QCA4019 hw1.0 >> > >> > + bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=OM-A62 >> > sha256sum: >> > df5dc5a55506e2a58dcb0b8542f40226d3bfd530a6fc0bc90c728ab18a57144c >> > + bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=OM-A62 >> > sha256sum: >> > 96c3d044fe26522c75313c210ace6f85d5bdcdbce3350214d92467501a01fb88 >> > >> > - QCA9888 hw2.0 >> > >> > + bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62 >> > sha256sum: >> > c85b23763e748abeb7e8c42e243dab1fc58d1bff94111e4058bdf31ddb14cefa > [...] >> I added these now, please check the results: >> >> https://github.com/kvalo/ath10k-firmware/commit/ > a262aac7cfe5ae5833378b4f1b0634f873a4df4d >> > > Unfortunately, this is wrong. Please check the mail again. The > bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62 BDF is for the QCA9888 > hw2.0 board-2.bin and not the QCA4019 hw1.0.
Thanks for noticing, I'll fix that. But please separate different hw to different mails, this way I can process them one hw version at the time. -- Kalle Valo _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
