On Donnerstag, 19. April 2018 16:47:22 CEST Sven Eckelmann wrote: > On Donnerstag, 19. April 2018 14:33:04 CEST Kalle Valo wrote: > > >> Unfortunately, this is wrong. Please check the mail again. The > > >> bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62 BDF is for the > > >> QCA9888 > > >> hw2.0 board-2.bin and not the QCA4019 hw1.0. > > > > > > Thanks for noticing, I'll fix that. But please separate different hw to > > > different mails, this way I can process them one hw version at the time. > > > > Fixed now, please double check: > > > > https://github.com/kvalo/ath10k-firmware/commit/a315471a5f4c9890e2ed1bdb008b7aae5c885ae0 > > > > https://github.com/kvalo/ath10k-firmware/commit/c3604f7d3ff61d1905aac644c721372f3c2a9663 > > > Ok, will use md5sum and split my submission based on the wifi hw. > > The board-2.bin's look fine now. > > pending > ======= > > * Asus RT-AC58U > > - submitted before the guide was published > - http://lists.infradead.org/pipermail/ath10k/2017-March/009454.html I made a v2 back in 2018 January.
http://lists.infradead.org/pipermail/ath10k/2018-January/010770.html This was necessary since ASUS updated the board file. Regards, Christian _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
