Christian Lamparter <[email protected]> writes: > On Donnerstag, 19. April 2018 16:47:22 CEST Sven Eckelmann wrote: >> On Donnerstag, 19. April 2018 14:33:04 CEST Kalle Valo wrote: >> > >> Unfortunately, this is wrong. Please check the mail again. The >> > >> bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62 BDF is for the >> > >> QCA9888 >> > >> hw2.0 board-2.bin and not the QCA4019 hw1.0. >> > > >> > > Thanks for noticing, I'll fix that. But please separate different hw to >> > > different mails, this way I can process them one hw version at the time. >> > >> > Fixed now, please double check: >> > >> > https://github.com/kvalo/ath10k-firmware/commit/a315471a5f4c9890e2ed1bdb008b7aae5c885ae0 >> > >> > https://github.com/kvalo/ath10k-firmware/commit/c3604f7d3ff61d1905aac644c721372f3c2a9663 >> >> >> Ok, will use md5sum and split my submission based on the wifi hw. >> >> The board-2.bin's look fine now. >> >> pending >> ======= >> >> * Asus RT-AC58U >> >> - submitted before the guide was published >> - http://lists.infradead.org/pipermail/ath10k/2017-March/009454.html > I made a v2 back in 2018 January. > > http://lists.infradead.org/pipermail/ath10k/2018-January/010770.html > > This was necessary since ASUS updated the board file.
Oh, I missed that. I already pushed the update with 2017 board files, but I'll try to update them in the next few days. -- Kalle Valo _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
