Kalle Valo <[email protected]> writes: > Sven Eckelmann <[email protected]> writes: > >> On Donnerstag, 19. April 2018 10:20:41 CEST Kalle Valo wrote: >> [...] >>> > - QCA4019 hw1.0 >>> > >>> > + bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=OM-A62 >>> > sha256sum: >>> > df5dc5a55506e2a58dcb0b8542f40226d3bfd530a6fc0bc90c728ab18a57144c >>> > + bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=OM-A62 >>> > sha256sum: >>> > 96c3d044fe26522c75313c210ace6f85d5bdcdbce3350214d92467501a01fb88 >>> > >>> > - QCA9888 hw2.0 >>> > >>> > + bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62 >>> > sha256sum: >>> > c85b23763e748abeb7e8c42e243dab1fc58d1bff94111e4058bdf31ddb14cefa >> [...] >>> I added these now, please check the results: >>> >>> https://github.com/kvalo/ath10k-firmware/commit/ >> a262aac7cfe5ae5833378b4f1b0634f873a4df4d >>> >> >> Unfortunately, this is wrong. Please check the mail again. The >> bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62 BDF is for the QCA9888 >> hw2.0 board-2.bin and not the QCA4019 hw1.0. > > Thanks for noticing, I'll fix that. But please separate different hw to > different mails, this way I can process them one hw version at the time.
Fixed now, please double check: https://github.com/kvalo/ath10k-firmware/commit/a315471a5f4c9890e2ed1bdb008b7aae5c885ae0 https://github.com/kvalo/ath10k-firmware/commit/c3604f7d3ff61d1905aac644c721372f3c2a9663 -- Kalle Valo _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
