thanks for the ethernet tip! How didn't I think of that?!?! [image: :P]
I did compile the ndiswrapper driver (the latest one) on booth intrepid and gutsy, but still got the same error... HAAAAA... so frustrating!!! [image: :@] What you mean restricted driver? are you referring to the broadcom linux native driver for the BCM4328? if so, yep, I did tried that and it apparently works... the problem is that I want to use the wifi as adhoc or master, and that driver only supports managed... [image: :S] I read in this discussion list that ndiswrapper driver supports master and adhoc, so I was hopping to make it work instead... -H On Thu, Mar 26, 2009 at 5:15 AM, Derek Keefe <[email protected]> wrote: > > any ideas? yeah, use ethernet. :) > > Did you try the restricted driver? > > In the past I had to compile ndiswrapper in order for it to work on the > apple tv. The ubuntu provided one never worked. > > > > > Hradec wrote: > > Hi there... > > > > I just got a new appletv last weekend and just installed ubuntu on it. > > (using debootstrap). > > > > I tried on booth 8.10 intrepid (2.6.27-7-generic) and 7.10 gutsy > > (2.6.22-14-generic), with different ndiswrapper versions (1.52 to the > > latest). > > > > no matter what, I get this errors in dmesg: > > > > [ 2494.716000] ndiswrapper version 1.52 loaded (smp=yes, preempt=no) > > [ 2494.724000] ndiswrapper: driver bcmwl5 (Broadcom,10/12/2006, > > 4.100.15.5) loaded > > [ 2494.728000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, > > low) -> IRQ 16 > > [ 2494.728000] PCI: Setting latency timer of device 0000:02:00.0 to 64 > > [ 2494.728000] ndiswrapper (NdisWriteErrorLogEntry:191): log: > > C000138D, count: 1, return_address: d0a5d937 > > [ 2494.728000] ndiswrapper (NdisWriteErrorLogEntry:194): code: 0x10b > > [ 2494.728000] ndiswrapper (mp_init:216): couldn't initialize device: > > C0000001 > > [ 2494.728000] ndiswrapper (pnp_start_device:439): Windows driver > > couldn't initialize the device (C0000001) > > [ 2494.728000] ndiswrapper (mp_halt:259): device cf0bd500 is not > > initialized - not halting > > [ 2494.728000] ndiswrapper: device eth%d removed > > [ 2494.728000] ACPI: PCI interrupt for device 0000:02:00.0 disabled > > [ 2494.728000] ndiswrapper: probe of 0000:02:00.0 failed with error > > -22 > > [ 2494.732000] usbcore: registered new interface driver ndiswrapper > > > > > > this is lspci: > > 02:00.0 Network controller: Broadcom Corporation BCM4328 802.11a/b/ > > g/n (rev 05) > > > > lspci -n: > > 02:00.0 0280: 14e4:4328 (rev 05) > > > > ndiswrapper -l: > > bcmwl5 : driver installed > > device (14E4:4328) present > > > > > > any ideas?? (heeeeeelp plz!!! =D ) > > > > thanks in advance guys... > > -H > > > > > > > > > > > > > -- -Hradec --~--~---------~--~----~------------~-------~--~----~ To post to this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/atv-bootloader?hl=en -~----------~----~----~----~------~----~------~--~---
