The first one I tried was this, from atv-bootloader wifi
tutorial<http://code.google.com/p/atv-bootloader/wiki/InstallWireless>
:

http://ftp.us.dell.com/network/R140746.EXE

then I tried this other one that I found in another forum for the BCM4328:
ftp://ftp.dell.com/network/R151517.EXE

but aparently its the same one, as dmesg reported booth to be:

           "ndiswrapper: driver bcmwl5 (Broadcom,10/12/2006, 4.100.15.5) loaded"

I tried some others from an ubuntu tutorial, but apparently it was
also the same one...
I was wondering if the windows driver is the problem... on all foruns,
seens that everyone has a
rev 03 or less... mine is rev 05... so maybe I need a newer windows driver?

thanks for the help man...

-H




On Thu, Mar 26, 2009 at 11:32 AM, Derek Keefe <[email protected]> wrote:

>
> where did you get the windows drivers?
>
> Hradec wrote:
> > thanks for the ethernet tip! How didn't I think of that?!?! :P
> >
> >
> > I did compile the ndiswrapper driver (the latest one) on booth
> > intrepid and gutsy, but still got the same error... HAAAAA... so
> > frustrating!!! :@
> >
> > What you mean restricted driver? are you referring to the broadcom
> > linux native driver for the BCM4328? if so, yep, I did tried that and
> > it apparently works... the problem is that I want to use the wifi as
> > adhoc or master, and that driver only supports managed... :S
> >
> > I read in this discussion list that ndiswrapper driver supports master
> > and adhoc, so I was hopping to make it work instead...
> >
> > -H
> >
> >
> > On Thu, Mar 26, 2009 at 5:15 AM, Derek Keefe <[email protected]
> > <mailto:[email protected]>> wrote:
> >
> >
> >     any ideas?  yeah, use ethernet.  :)
> >
> >     Did you try the restricted driver?
> >
> >     In the past I had to compile ndiswrapper in order for it to work
> >     on the
> >     apple tv.  The ubuntu provided one never worked.
> >
> >
> >
> >
> >     Hradec wrote:
> >     > Hi there...
> >     >
> >     > I just got a new appletv last weekend and just installed ubuntu
> >     on it.
> >     > (using debootstrap).
> >     >
> >     > I tried on booth 8.10 intrepid (2.6.27-7-generic) and 7.10 gutsy
> >     > (2.6.22-14-generic), with different ndiswrapper versions (1.52
> >     to the
> >     > latest).
> >     >
> >     > no matter what, I get this errors in dmesg:
> >     >
> >     > [ 2494.716000] ndiswrapper version 1.52 loaded (smp=yes,
> preempt=no)
> >     > [ 2494.724000] ndiswrapper: driver bcmwl5 (Broadcom,10/12/2006,
> >     > 4.100.15.5) loaded
> >     > [ 2494.728000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16
> (level,
> >     > low) -> IRQ 16
> >     > [ 2494.728000] PCI: Setting latency timer of device 0000:02:00.0
> >     to 64
> >     > [ 2494.728000] ndiswrapper (NdisWriteErrorLogEntry:191): log:
> >     > C000138D, count: 1, return_address: d0a5d937
> >     > [ 2494.728000] ndiswrapper (NdisWriteErrorLogEntry:194): code:
> 0x10b
> >     > [ 2494.728000] ndiswrapper (mp_init:216): couldn't initialize
> >     device:
> >     > C0000001
> >     > [ 2494.728000] ndiswrapper (pnp_start_device:439): Windows driver
> >     > couldn't initialize the device (C0000001)
> >     > [ 2494.728000] ndiswrapper (mp_halt:259): device cf0bd500 is not
> >     > initialized - not halting
> >     > [ 2494.728000] ndiswrapper: device eth%d removed
> >     > [ 2494.728000] ACPI: PCI interrupt for device 0000:02:00.0 disabled
> >     > [ 2494.728000] ndiswrapper: probe of 0000:02:00.0 failed with error
> >     > -22
> >     > [ 2494.732000] usbcore: registered new interface driver ndiswrapper
> >     >
> >     >
> >     > this is lspci:
> >     >     02:00.0 Network controller: Broadcom Corporation BCM4328
> >     802.11a/b/
> >     > g/n (rev 05)
> >     >
> >     > lspci -n:
> >     >     02:00.0 0280: 14e4:4328 (rev 05)
> >     >
> >     > ndiswrapper -l:
> >     >     bcmwl5 : driver installed
> >     >           device (14E4:4328) present
> >     >
> >     >
> >     > any ideas?? (heeeeeelp plz!!! =D )
> >     >
> >     > thanks in advance guys...
> >     > -H
> >     >
> >     >
> >     > >
> >     >
> >
> >
> >
> >
> >
> > --
> > -Hradec
> >
> > >
>
> >
>


-- 
-Hradec

--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to [email protected]
For more options, visit this group at
http://groups.google.com/group/atv-bootloader?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to