could be. I'm out of ideas right now.
Hradec wrote: > The first one I tried was this, from atv-bootloader wifi tutorial > <http://code.google.com/p/atv-bootloader/wiki/InstallWireless>: > http://ftp.us.dell.com/network/R140746.EXE > > > then I tried this other one that I found in another forum for the BCM4328: > ftp://ftp.dell.com/network/R151517.EXE > > but aparently its the same one, as dmesg reported booth to be: > > "ndiswrapper: driver bcmwl5 (Broadcom,10/12/2006, 4.100.15.5) > loaded" > > > I tried some others from an ubuntu tutorial, but apparently it was also the > same one... > I was wondering if the windows driver is the problem... on all foruns, seens > that everyone has a > rev 03 or less... mine is rev 05... so maybe I need a newer windows driver? > > > thanks for the help man... > > -H > > > > > On Thu, Mar 26, 2009 at 11:32 AM, Derek Keefe <[email protected] > <mailto:[email protected]>> wrote: > > > where did you get the windows drivers? > > Hradec wrote: > > thanks for the ethernet tip! How didn't I think of that?!?! :P > > > > > > I did compile the ndiswrapper driver (the latest one) on booth > > intrepid and gutsy, but still got the same error... HAAAAA... so > > frustrating!!! :@ > > > > What you mean restricted driver? are you referring to the broadcom > > linux native driver for the BCM4328? if so, yep, I did tried > that and > > it apparently works... the problem is that I want to use the wifi as > > adhoc or master, and that driver only supports managed... :S > > > > I read in this discussion list that ndiswrapper driver supports > master > > and adhoc, so I was hopping to make it work instead... > > > > -H > > > > > > On Thu, Mar 26, 2009 at 5:15 AM, Derek Keefe > <[email protected] <mailto:[email protected]> > > <mailto:[email protected] <mailto:[email protected]>>> wrote: > > > > > > any ideas? yeah, use ethernet. :) > > > > Did you try the restricted driver? > > > > In the past I had to compile ndiswrapper in order for it to work > > on the > > apple tv. The ubuntu provided one never worked. > > > > > > > > > > Hradec wrote: > > > Hi there... > > > > > > I just got a new appletv last weekend and just installed > ubuntu > > on it. > > > (using debootstrap). > > > > > > I tried on booth 8.10 intrepid (2.6.27-7-generic) and 7.10 > gutsy > > > (2.6.22-14-generic), with different ndiswrapper versions (1.52 > > to the > > > latest). > > > > > > no matter what, I get this errors in dmesg: > > > > > > [ 2494.716000] ndiswrapper version 1.52 loaded (smp=yes, > preempt=no) > > > [ 2494.724000] ndiswrapper: driver bcmwl5 > (Broadcom,10/12/2006, > > > 4.100.15.5) loaded > > > [ 2494.728000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI > 16 (level, > > > low) -> IRQ 16 > > > [ 2494.728000] PCI: Setting latency timer of device > 0000:02:00.0 > > to 64 > > > [ 2494.728000] ndiswrapper (NdisWriteErrorLogEntry:191): log: > > > C000138D, count: 1, return_address: d0a5d937 > > > [ 2494.728000] ndiswrapper (NdisWriteErrorLogEntry:194): > code: 0x10b > > > [ 2494.728000] ndiswrapper (mp_init:216): couldn't initialize > > device: > > > C0000001 > > > [ 2494.728000] ndiswrapper (pnp_start_device:439): Windows > driver > > > couldn't initialize the device (C0000001) > > > [ 2494.728000] ndiswrapper (mp_halt:259): device cf0bd500 > is not > > > initialized - not halting > > > [ 2494.728000] ndiswrapper: device eth%d removed > > > [ 2494.728000] ACPI: PCI interrupt for device 0000:02:00.0 > disabled > > > [ 2494.728000] ndiswrapper: probe of 0000:02:00.0 failed > with error > > > -22 > > > [ 2494.732000] usbcore: registered new interface driver > ndiswrapper > > > > > > > > > this is lspci: > > > 02:00.0 Network controller: Broadcom Corporation BCM4328 > > 802.11a/b/ > > > g/n (rev 05) > > > > > > lspci -n: > > > 02:00.0 0280: 14e4:4328 (rev 05) > > > > > > ndiswrapper -l: > > > bcmwl5 : driver installed > > > device (14E4:4328) present > > > > > > > > > any ideas?? (heeeeeelp plz!!! =D ) > > > > > > thanks in advance guys... > > > -H > > > > > > > > > > > > > > > > > > > > > > > > > -- > > -Hradec > > > > > > > > > > > -- > -Hradec > > > --~--~---------~--~----~------------~-------~--~----~ To post to this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/atv-bootloader?hl=en -~----------~----~----~----~------~----~------~--~---
