opaqueice;329121 Wrote: > One tip for the behringer - I find the results are better when the mic > is used pointing vertically rather than at the speakers. Pointing it > at the speakers overemphasizes high frequencies, resulting in a dull > sound after the correction. > > > > It's not as snappy, especially if you use 24 or 32 bit filters. But > even with 24 bit, the pause before playing is pretty minor (maybe 1 or > 2 seconds) running on my 4 year old PC. > > When using Inguz you also can't jump around in a track by clicking on > the progress bar.
I gave Inguz a go yesterday and the pause between tracks was way too long. As much as 5-7 seconds and that is without any room correction, just basic eq. I adjusted just the bass only. I also didn't notice any bump in the bass even though I had up to +5 for bass and mid. I have a dell work station 690 with dual Xeon 1.6 hz and 2gb of memory. Where do I go wrong? Here is the log: 0080818215312: InguzDSP (version 0.9.28) -id 00:04:20:16:30:20 -wav -wavo -d 24 20080818215312: 00:04:20:16:30:20 This evaluation version will expire 9/1/2008 12:00:00 AM 20080818215312: 00:04:20:16:30:20 Gain -16 dB 20080818215312: 00:04:20:16:30:20 Impulse (null), matrix (null) 20080818215312: 00:04:20:16:30:20 EQ00E0AD2852 20080818215312: 00:04:20:16:30:20 16/44100 PCM => 24/44100 PCM TRIANGULAR, gain -16 dB 20080818215335: 00:04:20:16:30:20 Write fault 232: The pipe is being closed 20080818215335: 00:04:20:16:30:20 2024099 samples, 23468.75 ms (125 init), 1.9174 * realtime, peak -3.4411 dBfs 20080818215335: InguzDSP (version 0.9.28) -id 00:04:20:16:30:20 -wav -wavo -d 24 20080818215336: 00:04:20:16:30:20 This evaluation version will expire 9/1/2008 12:00:00 AM 20080818215336: 00:04:20:16:30:20 Gain -16 dB 20080818215336: 00:04:20:16:30:20 Impulse (null), matrix (null) 20080818215336: 00:04:20:16:30:20 EQ00E0AD2852 20080818215336: 00:04:20:16:30:20 16/44100 PCM => 24/44100 PCM TRIANGULAR, gain -16 dB 20080818215411: 00:04:20:16:30:20 Impulse (null), matrix (null) 20080818215411: 00:04:20:16:30:20 EQ002D787E66 20080818215418: 00:04:20:16:30:20 Impulse (null), matrix (null) 20080818215418: 00:04:20:16:30:20 EQ00E0AD2852 20080818215728: 00:04:20:16:30:20 Write DSPUtil.FastConvolver.00_04_20_16_30_20.tail (8190) 20080818215728: 00:04:20:16:30:20 11385024 samples, 232531.25 ms (140.625 init), 1.1095 * realtime, peak -3.2 dBfs 20080818215746: InguzDSP (version 0.9.28) -id 00:04:20:16:30:20 -wav -wavo -d 24 20080818215746: 00:04:20:16:30:20 This evaluation version will expire 9/1/2008 12:00:00 AM 20080818215746: 00:04:20:16:30:20 Gain -16 dB 20080818215746: 00:04:20:16:30:20 Impulse (null), matrix (null) 20080818215746: 00:04:20:16:30:20 EQ00E0AD2852 20080818215746: 00:04:20:16:30:20 16/44100 PCM => 24/44100 PCM TRIANGULAR, gain -16 dB 20080818220220: 00:04:20:16:30:20 Write DSPUtil.FastConvolver.00_04_20_16_30_20.tail (8190) 20080818220220: 00:04:20:16:30:20 12817152 samples, 273968.75 ms (140.625 init), 1.0585 * realtime, peak -3.4273 dBfs 20080818220237: InguzDSP (version 0.9.28) -id 00:04:20:16:30:20 -wav -wavo -d 24 20080818220237: 00:04:20:16:30:20 This evaluation version will expire 9/1/2008 12:00:00 AM 20080818220237: 00:04:20:16:30:20 Gain -16 dB 20080818220237: 00:04:20:16:30:20 Impulse (null), matrix (null) 20080818220237: 00:04:20:16:30:20 EQ00E0AD2852 20080818220237: 00:04:20:16:30:20 16/44100 PCM => 24/44100 PCM TRIANGULAR, gain -16 dB 20080818220519: 00:04:20:16:30:20 Write fault 232: The pipe is being closed 20080818220519: 00:04:20:16:30:20 7875235 samples, 162359.375 ms (140.625 init), 1.0963 * realtime, peak -6.8674 dBfs 20080818220758: InguzDSP (version 0.9.28) -id 00:04:20:16:30:20 -wav -wavo -d 24 20080818220758: 00:04:20:16:30:20 This evaluation version will expire 9/1/2008 12:00:00 AM 20080818220758: 00:04:20:16:30:20 Gain -16 dB 20080818220758: 00:04:20:16:30:20 Impulse (null), matrix (null) The gain adjustment is killing the sound too. -16db is way too much. Where do I change the gain setting? -- dvdit ------------------------------------------------------------------------ dvdit's Profile: http://forums.slimdevices.com/member.php?userid=18317 View this thread: http://forums.slimdevices.com/showthread.php?t=51046 _______________________________________________ audiophiles mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/audiophiles
