Brightness = OFF vs FULL correlation = left -99.5dB right -99.1dB Brightness = OFF vs 1 correlation = left -106.0dB right -107.8dB Brightness = OFF vs 2 correlation = left -84.8dB right -83.6dB Brightness = OFF vs 3 correlation = left -78.8dB right -76.6 dB
Brightness = FULL vs 1 correlation = left -99.8dB right -101.7dB Brightness = FULL vs 2 correlation = left -87.2dB right -85.3dB Brightness = FULL vs 3 correlation = left -78.9dB right -76.7dB Brightness = 1 vs 2 correlation = left -84.6dB right -83.4dB Brightness = 1 vs 3 correlation = left -78.7dB right -76.4dB Brightness = 2 vs 3 correlation = left -84.2dB right -81.6dB Conclusions: Noise induced by Brightness at settings off/1/full is very low and pretty much the same Avoid settings 2 & 3 (3 being the noisiest) Thoughts? Does this correspond to the findings of other? -- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal... SB3 (wired) - TACT 2.2X (Linear PSU) + Good Vibrations S/W - MF Triplethreat(Audiocom full mods) - Linn 5103 - Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Townsend Supertweeters, Blue Jeans Digital,Kimber Speaker & Chord Interconnect cables Outdoors: Boom ------------------------------------------------------------------------ Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=60041 _______________________________________________ audiophiles mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/audiophiles
