Hi, Found a bit of time to try it out. I am running under Windows 7 (sorry!). Compiled the source without any problems, but I am not sure what I am doing wrong. Just for info, avrdude can see the attached xplainedmini, and read/writes OK: > > D:\Dropbox\avarice>avrdude -p m168pb -c xplainedmini > avrdude: AVR device initialized and ready to accept instructions > Reading | ################################################## | 100% 0.07s > avrdude: Device signature = 0x1e9415 (probably m168pb) > avrdude: safemode: Fuses OK (E:FF, H:DF, L:E0) > avrdude done. Thank you. When I try avarice I just get this: > D:\Dropbox\avarice>avarice -d -4 -w -P m168p :4242 > AVaRICE version 2.13svn20160229, Mar 3 2016 11:51:04 And back to the prompt, without any further messages. I have tried various variations on the syntax, but they all do the same (other than those that are plain wrong on the syntax). Any idea what I can try? Br, Philip
On 03.03.2016 09:06, Joerg Wunsch wrote: > As Philip Mulrane wrote: > >> Can this also be used with the mEDBG of the xlpained mini? It >> apparently supports debug wire? > Yes, I added fragmentation / reassembly support yesterday, which > is required for mEDBG since they only support 64 bytes endpoint > size, and some transfers are (much) longer. > > However, there's currently still some issue where programming over > debugWIRE (through GDB's "load" command) doesn't work since AVaRICE > first attempts a flash erase which is not supported in debugWIRE mode, > and thus triggers an exception. Attaching to a pre-flashed device, > and debugging it, is possible though. > > There are some other cases where in some situations exceptions are > thrown. These have to be cleaned up before a new release can be > prepared. -- Bittrace14 UG Immanuel-Kant Str.59b 31812 Bad Pyrmont Fax: +49 32223945096 HRB 209338 Amtsger. Hannover Geschäftsführer Pauline Atkinson ------------------------------------------------------------------------------ Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140 _______________________________________________ avarice-user mailing list avarice-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/avarice-user
