Hi Venkat, Thanks a million for replying. I have posted so many times and no one replied so I was not sure this time too.
If you remember you have given me the circuit diagram via post around 4 years back. Right now I am facing few problems with my bike. 1. I doubt that the battery isn't charging well. There are times when self start does not work (battery down). After running for several KM then I am able to use the battery. I checked with the multimeter and I find just 2V coming from RR unit to the battery which I think isn't enough. I think it should come above 12V to charge the battery. 2. Before going to the RR unit I want to check the Stator coil. So, I was tring to open the case and it was not coming out. If you look at the pic at the following link: http://www.bcmtouring.com/forum/articles-f20/increase-bajaj-pulsar-s- headlight-intensity-170-a-t3671/ The second picture shows the left casing which I am unable to remove. I removed the 5 screws I could find in that casing. After removing all the screws I am just able to get a small gap only at the right bottom of the case near the front sprocket. I tried to put a screwdriver inside the gap and push but its very hard and I don't want to put more force. Regards, Bency --- In [email protected], "Venkat Shyam" <v.v.sh...@...> wrote: > > Service manuals are not easily availble. > > These are days when Service Training notes are to be used as the guide & not > the days of Service stn / workshop manuals. > > Training notes are not as comprehensive as the service stn manuals, but they > only service as quick reference book/ notes for some one who has undergone > the week long training at Bajaj's training centre. > > As far as the issue goes, please provide a link to your pic's where in point > towards what you've removed so far on the bike. may be some suggestions > could be based on the same. > > > 2008/12/23 Bency benc...@... > > > Hi Guys, > > > > Can anyone provide me Service Manual or workshop manual for Pulsar 180 > > classic? > > > > I am unable to open the stator plate. Looks like I need to remove > > something else other than the screws. Please help. > > > > Bency > > > > > > > > > > -- > Bye & have a Safe Ride > > Venkat Shyam,BV > Auto Service > (M) +91 9243-00-3337 > Log on to : www.auto-service.blogspot.com > www.talking-banyan-tree.blogspot.com > email: v.v.sh...@... > > > [Non-text portions of this message have been removed] >
