On Wed, Aug 05, 2020 at 12:16:27PM +0200, Oleksij Rempel wrote:
> Provide a driver which should act as nvmem consumer
> for board serial number information.
>
> To make use of this driver, DTS should contain a serial
> node with compatibe "barebox,serial" and nvmem-cell-names
> "serial-number":
>
> ...
> chosen {
> serial {
> compatible = "barebox,serial";
> nvmem-cell-names = "serial-number";
> nvmem-cells = &some_provider;
> };
> };
This driver only works when the EEPROM or whatever provides the NVMEM
contains the serial number in exactly the same format as shall be added
to the /serial-number property. This seems to be a special case only and
doesn't seem to justify a generic driver.
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
