On Tue, Aug 11, 2020 at 10:34:01AM +0200, Sascha Hauer wrote:
> On Wed, Aug 05, 2020 at 12:16:27PM +0200, Oleksij Rempel wrote:
> > Provide a driver which should act as nvmem consumer
> > for board serial number information.
> >
> > To make use of this driver, DTS should contain a serial
> > node with compatibe "barebox,serial" and nvmem-cell-names
> > "serial-number":
> >
> > ...
> > chosen {
> > serial {
> > compatible = "barebox,serial";
> > nvmem-cell-names = "serial-number";
> > nvmem-cells = &some_provider;
> > };
> > };
>
> This driver only works when the EEPROM or whatever provides the NVMEM
> contains the serial number in exactly the same format as shall be added
> to the /serial-number property. This seems to be a special case only and
> doesn't seem to justify a generic driver.As with usual devicetree based solution we can add additional compatibles to better describe a variant or quirk which should be used to convert raw data to the serial number in usable for environment and device tree way. I hope, by having generic drivers other users will alight with it by making new products or extend existing driver by mainlining existing products. Regards, Oleksij -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
signature.asc
Description: PGP signature
_______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
