From: Luca Lauro <[email protected]>
---
dts/src/arm/marvell/armada-370-netgear-rn104.dts | 173 ++++++++++++++---------
1 file changed, 104 insertions(+), 69 deletions(-)
diff --git a/dts/src/arm/marvell/armada-370-netgear-rn104.dts
b/dts/src/arm/marvell/armada-370-netgear-rn104.dts
index d752ac1d7b..d7cc0549f4 100644
--- a/dts/src/arm/marvell/armada-370-netgear-rn104.dts
+++ b/dts/src/arm/marvell/armada-370-netgear-rn104.dts
@@ -15,6 +15,10 @@ / {
model = "NETGEAR ReadyNAS 104";
compatible = "netgear,readynas-104", "marvell,armada370",
"marvell,armada-370-xp";
+ aliases {
+ state = &state_nand;
+ };
+
chosen {
stdout-path = "serial0:115200n8";
};
@@ -40,6 +44,12 @@ serial@12000 {
status = "okay";
};
+ /* eSATA interface */
+ sata@a0000 {
+ nr-ports = <1>;
+ status = "okay";
+ };
+
ethernet@70000 {
pinctrl-0 = <&ge0_rgmii_pins>;
pinctrl-names = "default";
@@ -103,15 +113,10 @@ g762_clk: g762-oscillator {
gpio-leds {
compatible = "gpio-leds";
- pinctrl-0 = <&backup_led_pin &power_led_pin>;
+ pinctrl-0 = <&power_led_pin
+ &backup_led_pin>;
pinctrl-names = "default";
- blue-backup-led {
- label = "rn104:blue:backup";
- gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
blue-power-led {
label = "rn104:blue:pwr";
gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
@@ -141,6 +146,12 @@ blue-sata4-led {
gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
default-state = "off";
};
+
+ blue-backup-led {
+ label = "rn104:blue:backup";
+ gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
};
auxdisplay {
@@ -159,17 +170,11 @@ auxdisplay {
gpio-keys {
compatible = "gpio-keys";
- pinctrl-0 = <&backup_button_pin
- &power_button_pin
- &reset_button_pin>;
+ pinctrl-0 = <&power_button_pin
+ &reset_button_pin
+ &backup_button_pin>;
pinctrl-names = "default";
- backup-button {
- label = "Backup Button";
- linux,code = <KEY_COPY>;
- gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
- };
-
power-button {
label = "Power Button";
linux,code = <KEY_POWER>;
@@ -181,6 +186,12 @@ reset-button {
linux,code = <KEY_RESTART>;
gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
};
+
+ backup-button {
+ label = "Backup Button";
+ linux,code = <KEY_COPY>;
+ gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+ };
};
gpio-poweroff {
@@ -189,18 +200,43 @@ gpio-poweroff {
pinctrl-names = "default";
gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
};
+
+ /* configure nand partition to store barebox environment */
+ environment {
+ compatible = "barebox,environment";
+ device-path = &nand_controller, "partname:environment";
+ };
+
+ /* configure nand partition to store barebox-state backend */
+ state_nand: nand_state_memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "barebox,state";
+ magic = <0xab67421f>;
+ backend-type = "raw";
+ backend = <&backend_state_nand>;
+ backend-storage-type = "circular";
+ backend-stridesize = <32>;
+
+
+ variable@0 {
+ reg = <0x0 0x1>;
+ type ="uint8";
+ default = <0x1>;
+ };
+ };
};
&pciec {
status = "okay";
- /* Connected to FL1009 USB 3.0 controller */
+ /* Connected to Marvell 88SE9170 SATA controller */
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
};
- /* Connected to Marvell 88SE9215 SATA controller */
+ /* Connected to FL1009 USB 3.0 controller */
pcie@2,0 {
/* Port 1, Lane 0 */
status = "okay";
@@ -220,8 +256,13 @@ phy1: ethernet-phy@1 { /* Marvell 88E1318 */
};
&pinctrl {
- poweroff: poweroff {
- marvell,pins = "mpp60";
+ power_led_pin: power-led-pin {
+ marvell,pins = "mpp64";
+ marvell,function = "gpio";
+ };
+
+ backup_led_pin: backup-led-pin {
+ marvell,pins = "mpp63";
marvell,function = "gpio";
};
@@ -235,68 +276,62 @@ power_button_pin: power-button-pin {
marvell,function = "gpio";
};
- backup_led_pin: backup-led-pin {
- marvell,pins = "mpp63";
- marvell,function = "gpio";
- };
-
- power_led_pin: power-led-pin {
- marvell,pins = "mpp64";
+ reset_button_pin: reset-button-pin {
+ marvell,pins = "mpp65";
marvell,function = "gpio";
};
- reset_button_pin: reset-button-pin {
- marvell,pins = "mpp65";
+ poweroff_pin: poweroff-pin {
+ marvell,pins = "mpp60";
marvell,function = "gpio";
};
};
&nand_controller {
+ compatible = "marvell,armada370-nand", "marvell,pxa3xx-nand";
status = "okay";
- nand@0 {
- reg = <0>;
- label = "pxa3xx_nand-0";
- nand-rb = <0>;
- marvell,nand-keep-config;
- nand-on-flash-bbt;
-
- /* Use Hardware BCH ECC */
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0000000 0x180000>; /* 1.5MB */
- read-only;
- };
+ label = <&nand_controller>;
+ nand-rb = <0>;
+ marvell,nand-keep-config;
+ nand-on-flash-bbt;
- partition@180000 {
- label = "u-boot-env";
- reg = <0x180000 0x20000>; /* 128KB */
- read-only;
- };
+ /* Use Hardware BCH ECC */
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
- partition@200000 {
- label = "uImage";
- reg = <0x0200000 0x600000>; /* 6MB */
- };
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
- partition@800000 {
- label = "minirootfs";
- reg = <0x0800000 0x400000>; /* 4MB */
- };
+ partition@0 {
+ label = "bootloader";
+ reg = <0x0 0x400000>; /* 4MB */
+ //read-only;
+ };
- /* Last MB is for the BBT, i.e. not writable */
- partition@c00000 {
- label = "ubifs";
- reg = <0x0c00000 0x7400000>; /* 116MB */
- };
+ partition@0x400000 {
+ label = "environment";
+ reg = <0x400000 0x80000>; /* 0.5MB */
+ //read-only;
};
+
+ backend_state_nand: partition@0x480000 {
+ label = "state";
+ reg = <0x480000 0x80000>; /* 0.5MB */
+ };
+
+ partition@0x500000 {
+ label = "kernel";
+ reg = <0x500000 0x1400000>; /* 20MB */
+ };
+
+ partition@0x1900000 {
+ label = "minirootfs";
+ reg = <0x1900000 0x6000000>; /* 100MB */
+ };
+
+ /* Last MB is for the BBT, i.e. not writable */
};
-};
+};
\ No newline at end of file
--
2.47.3
