On 2026-07-23 15:57, Luca Lauro via B4 Relay wrote: > From: Luca Lauro <[email protected]> > > --- > arch/arm/dts/Makefile | 1 + > arch/arm/dts/armada-370-rn102-bb.dts | 13 +++++++++++++ > 2 files changed, 14 insertions(+) > > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile > index a84e09e388..5d1b21b615 100644 > --- a/arch/arm/dts/Makefile > +++ b/arch/arm/dts/Makefile > @@ -51,6 +51,7 @@ lwl-$(CONFIG_MACH_MARVELL_ARMADA_XP_GP) += > armada-xp-gp-bb.dtb.o > lwl-$(CONFIG_MACH_MARVELL_ARMADA_XP_DB) += armada-xp-db-bb.dtb.o > lwl-$(CONFIG_MACH_MX28EVK) += imx28-evk.dtb.o > lwl-$(CONFIG_MACH_MYIRTECH_X335X) += am335x-myirtech-myd.dtb.o > am335x-myirtech-myd-mlo.dtb.o > +lwl-$(CONFIG_MACH_NETGEAR_RN102) += armada-370-rn102-bb.dtb.o > lwl-$(CONFIG_MACH_NETGEAR_RN104) += armada-370-rn104-bb.dtb.o > lwl-$(CONFIG_MACH_NETGEAR_RN2120) += armada-xp-rn2120-bb.dtb.o > lwl-$(CONFIG_MACH_NITROGEN6) += imx6q-nitrogen6x.dtb.o > imx6dl-nitrogen6x.dtb.o imx6qp-nitrogen6_max.dtb.o > diff --git a/arch/arm/dts/armada-370-rn102-bb.dts > b/arch/arm/dts/armada-370-rn102-bb.dts > new file mode 100644 > index 0000000000..0ade2cdd4e > --- /dev/null > +++ b/arch/arm/dts/armada-370-rn102-bb.dts > @@ -0,0 +1,13 @@ > +/* > + * Barebox specific DT overlay for Netgear ReadyNAS 102 > + */ > + > +#include "arm/marvell/armada-370-netgear-rn102.dts" > + > +/ { > + barebox,disable-deep-probe;
Why? Would be worth fixing this issue. Might be because you use different initcall levels in your board code. Sascha -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
