Seems bareos stopped at some point using the newly manually created volume
and does not create new volumes as needed.
What do I need to do to restore the volumes creations?
bareos-sd JobId 666: Job thclpcvprox03_job_D.2023-11-09_21.00.00_47 is
waiting. Cannot find any appendable volumes.
Please use the "label" command to create a new Volume for:
Storage: "FileStorage" (/var/lib/bareos/storage)
Pool: DailyFullCyclePool
Media type: File
On Thursday, November 9, 2023 at 2:24:15 PM UTC+2 Yariv Hazan wrote:
> After reboot I've created a volume manually using label and job seems to
> be working.
> Does this mean issue is resolved and further volumes will be created
> automatically as needed?
>
> bareos-dir JobId 664: Max Volume jobs=1 exceeded. Marking Volume "NewVol1"
> as Used.
> bareos-sd JobId 664: Wrote label to prelabeled Volume "NewVol1" on device
> "FileStorage" (/var/lib/bareos/storage)
>
> On Thursday, November 9, 2023 at 2:13:30 PM UTC+2 Yariv Hazan wrote:
>
>> This is what I get, does not seem relevant.
>> Will reboot the system and check thanks.
>>
>> There are configuration warnings:
>> * Device FileStorage: unlimited (0) 'Maximum Concurrent Jobs' (the
>> default) reduces the restore peformance.
>> * Device FileStorage: the default value for 'Maximum Concurrent Jobs'
>> will change from 0 (unlimited) to 1 in Bareos 23.
>>
>>
>> On Thursday, November 9, 2023 at 1:13:55 PM UTC+2 Miguel Santos wrote:
>>
>>> Something is wrong between memory, filesystem and database.
>>>
>>>
>>> bareos-sd -t to see any potential issues with the configuration.
>>> Hopefully it will tell you what's wrong.
>>>
>>> Restart all daemons after you have fixed the issue.
>>>
>>> On Thursday, November 9, 2023 at 11:43:59 AM UTC+1 Yariv Hazan wrote:
>>>
>>>> Please see below some of the output I get running "status storage" in
>>>> any case I get the "*" prompt so nothing to choose from:
>>>>
>>>>
>>>> There are WARNINGS for this storagedaemon's configuration!
>>>> See output of 'bareos-sd -t' for details.
>>>>
>>>> Running Jobs:
>>>> Writing: Full Backup job wpcoreopswat01_job_D JobId=663 Volume=""
>>>> pool="DailyFullCyclePool" device="FileStorage"
>>>> (/var/lib/bareos/storage)
>>>> spooling=0 despooling=0 despool_wait=0
>>>> Files=0 Bytes=0 AveBytes/sec=0 LastBytes/sec=0
>>>> FDReadSeqNo=6 in_msg=6 out_msg=4 fd=6
>>>>
>>>>
>>>> Device status:
>>>>
>>>> Device "FileStorage" (/var/lib/bareos/storage) is not open.
>>>> Device is BLOCKED waiting to create a volume for:
>>>>
>>>> Pool: DailyFullCyclePool
>>>> Media type: File
>>>>
>>>>
>>>> On Thursday, November 9, 2023 at 12:25:05 PM UTC+2 Miguel Santos wrote:
>>>>
>>>>> Not related, but what most likely happened is that it cannot find the
>>>>> volume you deleted and bareos had plans to write into it. Even though it
>>>>> was yet unused, the record of that media was in the DB. (I am speculating
>>>>> here based on what you describe)
>>>>>
>>>>> The easiest option is to create a volume with the same name.
>>>>>
>>>>> Do a "status storage" in bconsole, then select the storage name and it
>>>>> most likely will tell you what the storage daemon is expecting to write
>>>>> to.
>>>>> Create a volume in that pool with the same name.
>>>>>
>>>>> If you deleted volumes, please make sure you also delete volumes from
>>>>> your DB by issuing:
>>>>>
>>>>> "delete volume" in bconsole.
>>>>>
>>>>> On Thursday, November 9, 2023 at 10:54:43 AM UTC+1 Yariv Hazan wrote:
>>>>>
>>>>>> I'm not sure its related but using bconsole I have deleted an empty
>>>>>> unused volume restarted director and now I get this error running jobs:
>>>>>>
>>>>>> bareos-sd JobId 663: Job wpcoreopswat01_job_D.2023-11-09_11.42.35_06
>>>>>> is waiting. Cannot find any appendable volumes.
>>>>>> Please use the "label" command to create a new Volume for:
>>>>>> Storage: "FileStorage" (/var/lib/bareos/storage)
>>>>>> Pool: DailyFullCyclePool
>>>>>> Media type: File
>>>>>>
>>>>>> Runing label in bconsole and creating a new volume in
>>>>>> DailyFullCyclePool does not seem to solve the problem.
>>>>>>
>>>>>> On Thursday, November 9, 2023 at 11:51:37 AM UTC+2 Yariv Hazan wrote:
>>>>>>
>>>>>>> Great so fixed and let it run see how it goes.
>>>>>>>
>>>>>>>
>>>>>>> On Thursday, November 9, 2023 at 10:50:42 AM UTC+2 Miguel Santos
>>>>>>> wrote:
>>>>>>>
>>>>>>>> Sorry about that, yes, the name of the pools is all mixed up since
>>>>>>>> the beginning when I sent the first message.
>>>>>>>>
>>>>>>>> But the fix should be self explanatory.
>>>>>>>>
>>>>>>>> Run = Level=Full Pool=DailyFullCyclePool
>>>>>>>> FullPool=DailyFullCyclePool mon-sat at 22:00
>>>>>>>>
>>>>>>>> Run = Level=Full Pool=WeeklyFullCyclePool
>>>>>>>> FullPool=WeeklyFullCyclePool 2nd-5th sun at 22:00
>>>>>>>>
>>>>>>>> Run = Level=Full Pool=MonthlyFullCyclePool
>>>>>>>> FullPool=MonthlyFullCyclePool 1st sun at 22:00
>>>>>>>>
>>>>>>>> On Thursday, November 9, 2023 at 9:04:48 AM UTC+1 Yariv Hazan wrote:
>>>>>>>>
>>>>>>>>> This looks OK, but maybe its the naming is the issue.
>>>>>>>>> What pool should hold which backups?
>>>>>>>>> DailyFullCyclePool should hold mon-sat at 22:00
>>>>>>>>> MonthlyFullCyclePool should hold 1st sun at 22:00
>>>>>>>>> Right?
>>>>>>>>>
>>>>>>>>> On Tuesday, November 7, 2023 at 4:15:16 PM UTC+2 Miguel Santos
>>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>>> I think I have seen this before and probably it may be a bug, but
>>>>>>>>>> I have not had the initiative to look further.
>>>>>>>>>>
>>>>>>>>>> So, what I believe is happening is that the Pool is taken from
>>>>>>>>>> either the defaults.
>>>>>>>>>>
>>>>>>>>>> Can you try to change the schedule so it ends up like this?
>>>>>>>>>>
>>>>>>>>>> Schedule {
>>>>>>>>>>
>>>>>>>>>> Name = CustomCycle
>>>>>>>>>>
>>>>>>>>>> Run = Level=Full Pool=DailyFullCyclePool
>>>>>>>>>> *FullPool=DailyFullCyclePool* 1st sun at 22:00
>>>>>>>>>>
>>>>>>>>>> Run = Level=Full Pool=WeeklyFullCyclePool
>>>>>>>>>> *FullPool=WeeklyFullCyclePool* 2nd-5th sun at 22:00
>>>>>>>>>>
>>>>>>>>>> Run = Level=Full Pool=MonthlyFullCyclePool
>>>>>>>>>> *FullPool=MonthlyFullCyclePool* mon-sat at 22:00
>>>>>>>>>> }
>>>>>>>>>>
>>>>>>>>>> Just adding FullPool to the schedule.
>>>>>>>>>>
>>>>>>>>>> Good luck.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Tuesday, November 7, 2023 at 3:01:29 PM UTC+1 Yariv Hazan
>>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>>> Hi Guys,
>>>>>>>>>>>
>>>>>>>>>>> I did as per your help and created the files per your examples
>>>>>>>>>>> thank you so much.
>>>>>>>>>>>
>>>>>>>>>>> I can see the bold letering and also updated the volumes,
>>>>>>>>>>> thanks!
>>>>>>>>>>>
>>>>>>>>>>> Seems backups are being saved to an old volume Monthly-0006 ,
>>>>>>>>>>> meaning they are not written to a new Daily-XXXX that is supposed
>>>>>>>>>>> to be
>>>>>>>>>>> created.
>>>>>>>>>>>
>>>>>>>>>>> Please see my configuration:
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Job {
>>>>>>>>>>>
>>>>>>>>>>> Name = "lpsoar01_job_D"
>>>>>>>>>>>
>>>>>>>>>>> JobDefs = "DailyJobDefs"
>>>>>>>>>>>
>>>>>>>>>>> FileSet = "lpsoar01_fileset"
>>>>>>>>>>>
>>>>>>>>>>> Schedule = "CustomCycle"
>>>>>>>>>>>
>>>>>>>>>>> }
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Job {
>>>>>>>>>>>
>>>>>>>>>>> Name = "lpsyslog01_job_D"
>>>>>>>>>>>
>>>>>>>>>>> JobDefs = "DailyJobDefs"
>>>>>>>>>>>
>>>>>>>>>>> FileSet = "lpsyslog01_fileset"
>>>>>>>>>>>
>>>>>>>>>>> Schedule = "CustomCycle"
>>>>>>>>>>>
>>>>>>>>>>> }
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> JobDefs {
>>>>>>>>>>>
>>>>>>>>>>> Name = "DailyJobDefs"
>>>>>>>>>>>
>>>>>>>>>>> Type = Backup
>>>>>>>>>>>
>>>>>>>>>>> Level = Full
>>>>>>>>>>>
>>>>>>>>>>> Client = bareos-fd
>>>>>>>>>>>
>>>>>>>>>>> Schedule = "CustomCycle" ß--------------I’ve changed this
>>>>>>>>>>> line
>>>>>>>>>>>
>>>>>>>>>>> Storage = File
>>>>>>>>>>>
>>>>>>>>>>> Messages = Standard
>>>>>>>>>>>
>>>>>>>>>>> Pool = DailyFullCyclePool
>>>>>>>>>>>
>>>>>>>>>>> Priority = 10
>>>>>>>>>>>
>>>>>>>>>>> Write Bootstrap = "/var/lib/bareos/%c.bsr"
>>>>>>>>>>>
>>>>>>>>>>> Full Backup Pool = DailyFullCyclePool # write Full Backups
>>>>>>>>>>> into "Full-Pool" Pool
>>>>>>>>>>>
>>>>>>>>>>> Differential Backup Pool = Differential # write Diff Backups
>>>>>>>>>>> into "Differential" Pool
>>>>>>>>>>>
>>>>>>>>>>> Incremental Backup Pool = Incremental # write Incr Backups
>>>>>>>>>>> into "Incremental" Pool
>>>>>>>>>>>
>>>>>>>>>>> }
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Pool {
>>>>>>>>>>>
>>>>>>>>>>> Name = DailyFullCyclePool
>>>>>>>>>>>
>>>>>>>>>>> Pool Type = Backup
>>>>>>>>>>>
>>>>>>>>>>> Recycle = yes
>>>>>>>>>>>
>>>>>>>>>>> AutoPrune = yes
>>>>>>>>>>>
>>>>>>>>>>> Volume Retention = 7 days
>>>>>>>>>>>
>>>>>>>>>>> Maximum Volume Jobs = 1
>>>>>>>>>>>
>>>>>>>>>>> Label Format = Daily-
>>>>>>>>>>>
>>>>>>>>>>> Maximum Volumes = 7
>>>>>>>>>>>
>>>>>>>>>>> }
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Pool {
>>>>>>>>>>>
>>>>>>>>>>> Name = WeeklyFullCyclePool
>>>>>>>>>>>
>>>>>>>>>>> Pool Type = Backup
>>>>>>>>>>>
>>>>>>>>>>> Recycle = yes
>>>>>>>>>>>
>>>>>>>>>>> AutoPrune = yes
>>>>>>>>>>>
>>>>>>>>>>> Volume Retention = 31 days
>>>>>>>>>>>
>>>>>>>>>>> Maximum Volume Jobs = 100
>>>>>>>>>>>
>>>>>>>>>>> Label Format = Weekly-
>>>>>>>>>>>
>>>>>>>>>>> Maximum Volumes = 5
>>>>>>>>>>>
>>>>>>>>>>> }
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Pool {
>>>>>>>>>>>
>>>>>>>>>>> Name = MonthlyFullCyclePool
>>>>>>>>>>>
>>>>>>>>>>> Pool Type = Backup
>>>>>>>>>>>
>>>>>>>>>>> Recycle = yes
>>>>>>>>>>>
>>>>>>>>>>> AutoPrune = yes
>>>>>>>>>>>
>>>>>>>>>>> Volume Retention = 181 days
>>>>>>>>>>>
>>>>>>>>>>> Maximum Volume Jobs = 100
>>>>>>>>>>>
>>>>>>>>>>> Label Format = Monthly-
>>>>>>>>>>>
>>>>>>>>>>> Maximum Volumes = 6
>>>>>>>>>>>
>>>>>>>>>>> }
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Schedule {
>>>>>>>>>>>
>>>>>>>>>>> Name = CustomCycle
>>>>>>>>>>>
>>>>>>>>>>> Run = Level=Full Pool=DailyFullCyclePool 1st sun at
>>>>>>>>>>> 22:00 ßChanged this line according to
>>>>>>>>>>> my existing pool
>>>>>>>>>>>
>>>>>>>>>>> Run = Level=Full Pool=WeeklyFullCyclePool 2nd-5th sun at
>>>>>>>>>>> 22:00 ß Changed this line according to my existing
>>>>>>>>>>> pool
>>>>>>>>>>>
>>>>>>>>>>> Run = Level=Full Pool=MonthlyFullCyclePool mon-sat at
>>>>>>>>>>> 22:00 ß Changed this line according to my
>>>>>>>>>>> existing pool
>>>>>>>>>>>
>>>>>>>>>>> }
>>>>>>>>>>>
>>>>>>>>>>> On Sunday, October 29, 2023 at 12:25:36 PM UTC+2 Yariv Hazan
>>>>>>>>>>> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Hello,
>>>>>>>>>>>> My retention is pretty simple(?) I have only full backups and I
>>>>>>>>>>>> need to keep backups for
>>>>>>>>>>>> Last 6 daily backups for a week
>>>>>>>>>>>> Last 4 weekly backups for a month
>>>>>>>>>>>> Last 6 monthly backups for 6 months.
>>>>>>>>>>>>
>>>>>>>>>>>> But:
>>>>>>>>>>>> 1. All backups are kept for much longer without being pruned.
>>>>>>>>>>>> 2. A daily backup volume is created every day but older daily
>>>>>>>>>>>> backup volume are used instead.
>>>>>>>>>>>>
>>>>>>>>>>>> I run version 22.1.1~pre26.eeec2501e without any changes to
>>>>>>>>>>>> defaults.
>>>>>>>>>>>>
>>>>>>>>>>>> Here is an examples of my configuration:
>>>>>>>>>>>>
>>>>>>>>>>>> Job {
>>>>>>>>>>>> Name = "lpsoar01_job_D"
>>>>>>>>>>>> JobDefs = "DailyJobDefs"
>>>>>>>>>>>> FileSet = "lpsoar01_fileset"
>>>>>>>>>>>> Schedule = "DailyFullCycle"
>>>>>>>>>>>> }
>>>>>>>>>>>>
>>>>>>>>>>>> JobDefs {
>>>>>>>>>>>> Name = "DailyJobDefs"
>>>>>>>>>>>> Type = Backup
>>>>>>>>>>>> Level = Full
>>>>>>>>>>>> Client = bareos-fd
>>>>>>>>>>>> Schedule = "DailyFullCycle"
>>>>>>>>>>>> Storage = File
>>>>>>>>>>>> Messages = Standard
>>>>>>>>>>>> Pool = DailyFullCyclePool
>>>>>>>>>>>> Priority = 10
>>>>>>>>>>>> Write Bootstrap = "/var/lib/bareos/%c.bsr"
>>>>>>>>>>>> Full Backup Pool = DailyFullCyclePool # write
>>>>>>>>>>>> Full Backups into "Full-Pool" Pool
>>>>>>>>>>>> Differential Backup Pool = Differential # write Diff Backups
>>>>>>>>>>>> into "Differential" Pool
>>>>>>>>>>>> Incremental Backup Pool = Incremental # write Incr Backups
>>>>>>>>>>>> into "Incremental" Pool
>>>>>>>>>>>> }
>>>>>>>>>>>>
>>>>>>>>>>>> Pool {
>>>>>>>>>>>> Name = DailyFullCyclePool
>>>>>>>>>>>> Pool Type = Backup
>>>>>>>>>>>> Recycle = yes
>>>>>>>>>>>> AutoPrune = yes
>>>>>>>>>>>> Volume Retention = 7 days
>>>>>>>>>>>> Maximum Volume Jobs = 100
>>>>>>>>>>>> Label Format = Daily-
>>>>>>>>>>>> Maximum Volumes = 40
>>>>>>>>>>>> }
>>>>>>>>>>>>
>>>>>>>>>>>> What am I doing wrong here?
>>>>>>>>>>>> Thanks,
>>>>>>>>>>>> Yariv
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
--
You received this message because you are subscribed to the Google Groups
"bareos-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to bareos-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/bareos-users/00cdac18-2c00-45c7-933c-9652a09f1452n%40googlegroups.com.
