Do either of you have SSDs in your machines?
I recently tried installing an SSD as the boot drive on an MBP,
installed latest Lion, and experienced stalling issues very
similar to what you describe. My observation was that with
system & software running on the SSD, the semi-freezes would
occur connected with accessing files from HDDs or something
online. So I'm picturing some sort of speed mismatch between the
SSD and whatever it draws from the HDD/remote source.
[But note that I'm not done trouble-shooting my SSD with the
vendor, and suggestions for me about that would be OT for this
list. But if a hardware feature is in common with a behavior
problem in system or software, I think it's worth mentioning
here as an avenue to explore.]
On 2012-04-04, Gribnif wrote:
This sounds somewhat similar to a problem I have been having since I
upgraded to version 10 in October.
In my case, I am using NFS, and the lockups are more unpredictable.
They only happen 2-3 times per day, and last up to a minute.
I have already contacted tech support about it, and sent them logs
from Spin Control. In my case, the problem seems to be caused by the
large number of documents I have open, with the Soft Wrap option
turned on. Using this information, they did correct one part of the
bug, where it could be directly induced by resizing a project window;
this would cause BBEdit to try to rewrap every open document in the
project.
But the random lockup is still there. When it happens, I can see all
the little grey X's next to the open documents disappear, and watch
them slowly reappear, as BBEdit rewraps them all.
I have not found a way to reliably cause this type of rewrap to occur,
or a way to prevent it (other than turning off Soft Wrap for every
document, which is not an option for me.) It happens at random times,
which are not related to anything else happening on the Mac or the NFS
server.
- Bruce
_bruce__van_allen__santa_cruz_ca_
--
You received this message because you are subscribed to the
"BBEdit Talk" discussion group on Google Groups.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
<http://groups.google.com/group/bbedit?hl=en>
If you have a feature request or would like to report a problem,
please email "[email protected]" rather than posting to the group.
Follow @bbedit on Twitter: <http://www.twitter.com/bbedit>
