On Sunday 23 March 2008 15:11:37 kala mazoo wrote: > > ---------------------------------------- > > From: [EMAIL PROTECTED] > > To: [email protected] > > Subject: Re: More on ASUS WL-138G V2 > > Date: Sun, 23 Mar 2008 15:04:09 +0100 > > CC: [EMAIL PROTECTED]; [EMAIL PROTECTED] > > > > On Sunday 23 March 2008 14:58:08 kala mazoo wrote: > >> [EMAIL PROTECTED]:~# cat /debug/b43/phy*/txstat > >> > >> Nothing transmitted, yet. > >> > >> > >> That situation did not change -- 5minutes of low level gibberish in dmesg > >> (like the above ;) and /debug/b43/phy*/txstat did NOT change... > >> > >> > >> That's not good, is it?.....Next?... > > > > dmesg after ifconfig down with b43 debug enabled, please. > > > > -- > > Greetings Michael. > > Hey there Michael, > > What you ask for appears below with a little > preamble...; > > HW CONFIG: channel=1 freq=2412 phymode=2 > HW CONFIG: channel=1 freq=2412 phymode=2 > wlan0: Initial auth_alg=0 > wlan0: authenticate with AP 00:1e:2a:61:7d:2c > phy0: TX to low-level driver (len=30) FC=0x00b0 DUR=0x013a > A1=00:1e:2a:61:7d:2c > A2=00:1b:fc:61:15:e1 A3=00:1e:2a:61:7d:2c > wlan0: authenticate with AP 00:1e:2a:61:7d:2c > phy0: TX to low-level driver (len=30) FC=0x00b0 DUR=0x013a > A1=00:1e:2a:61:7d:2c > A2=00:1b:fc:61:15:e1 A3=00:1e:2a:61:7d:2c > wlan0: authenticate with AP 00:1e:2a:61:7d:2c > phy0: TX to low-level driver (len=30) FC=0x00b0 DUR=0x013a > A1=00:1e:2a:61:7d:2c > A2=00:1b:fc:61:15:e1 A3=00:1e:2a:61:7d:2c > wlan0: authentication with AP 00:1e:2a:61:7d:2c timed out > b43-phy0 debug: Disabling hardware based encryption for keyidx: 0, mac: > ff:ff:ff > :ff:ff:ff > b43-phy0 debug: Removing Interface type 2 > b43-phy0 debug: Wireless interface stopped > b43-phy0 debug: DMA-32 0x0200 (RX) max used slots: 1/64 > b43-phy0 debug: DMA-32 0x02A0 (TX) max used slots: 0/128 > b43-phy0 debug: DMA-32 0x0280 (TX) max used slots: 0/128 > b43-phy0 debug: DMA-32 0x0260 (TX) max used slots: 0/128 > b43-phy0 debug: DMA-32 0x0240 (TX) max used slots: 0/128 > b43-phy0 debug: DMA-32 0x0220 (TX) max used slots: 50/128 > b43-phy0 debug: DMA-32 0x0200 (TX) max used slots: 0/128
Ok, the card does not transmit the data. A few people reported this and I have absolutely no idea what's going on. -- Greetings Michael. _______________________________________________ Bcm43xx-dev mailing list [email protected] https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
