----------------------------------------
> From: [EMAIL PROTECTED]
> To: [EMAIL PROTECTED]
> Subject: Re: More on ASUS WL-138G V2
> Date: Sun, 23 Mar 2008 15:17:06 +0100
> CC: [email protected]
>
> On Sunday 23 March 2008 15:11:37 kala mazoo wrote:
>>
>> ----------------------------------------
>>> From: [EMAIL PROTECTED]
>>> To: [email protected]
>>> Subject: Re: More on ASUS WL-138G V2
>>> Date: Sun, 23 Mar 2008 15:04:09 +0100
>>> CC: [EMAIL PROTECTED]; [EMAIL PROTECTED]
>>>
>>> On Sunday 23 March 2008 14:58:08 kala mazoo wrote:
>>>> [EMAIL PROTECTED]:~# cat /debug/b43/phy*/txstat
>>>>
>>>> Nothing transmitted, yet.
>>>>
>>>>
>>>> That situation did not change -- 5minutes of low level gibberish in dmesg
>>>> (like the above ;) and /debug/b43/phy*/txstat did NOT change...
>>>>
>>>>
>>>> That's not good, is it?.....Next?...
>>>
>>> dmesg after ifconfig down with b43 debug enabled, please.
>>>
>>> --
>>> Greetings Michael.
>>
>> Hey there Michael,
>>
>> What you ask for appears below with a little
>> preamble...;
>>
>> HW CONFIG: channel=1 freq=2412 phymode=2
>> HW CONFIG: channel=1 freq=2412 phymode=2
>> wlan0: Initial auth_alg=0
>> wlan0: authenticate with AP 00:1e:2a:61:7d:2c
>> phy0: TX to low-level driver (len=30) FC=0x00b0 DUR=0x013a
>> A1=00:1e:2a:61:7d:2c
>> A2=00:1b:fc:61:15:e1 A3=00:1e:2a:61:7d:2c
>> wlan0: authenticate with AP 00:1e:2a:61:7d:2c
>> phy0: TX to low-level driver (len=30) FC=0x00b0 DUR=0x013a
>> A1=00:1e:2a:61:7d:2c
>> A2=00:1b:fc:61:15:e1 A3=00:1e:2a:61:7d:2c
>> wlan0: authenticate with AP 00:1e:2a:61:7d:2c
>> phy0: TX to low-level driver (len=30) FC=0x00b0 DUR=0x013a
>> A1=00:1e:2a:61:7d:2c
>> A2=00:1b:fc:61:15:e1 A3=00:1e:2a:61:7d:2c
>> wlan0: authentication with AP 00:1e:2a:61:7d:2c timed out
>> b43-phy0 debug: Disabling hardware based encryption for keyidx: 0, mac:
>> ff:ff:ff
>> :ff:ff:ff
>> b43-phy0 debug: Removing Interface type 2
>> b43-phy0 debug: Wireless interface stopped
>> b43-phy0 debug: DMA-32 0x0200 (RX) max used slots: 1/64
>> b43-phy0 debug: DMA-32 0x02A0 (TX) max used slots: 0/128
>> b43-phy0 debug: DMA-32 0x0280 (TX) max used slots: 0/128
>> b43-phy0 debug: DMA-32 0x0260 (TX) max used slots: 0/128
>> b43-phy0 debug: DMA-32 0x0240 (TX) max used slots: 0/128
>> b43-phy0 debug: DMA-32 0x0220 (TX) max used slots: 50/128
>> b43-phy0 debug: DMA-32 0x0200 (TX) max used slots: 0/128
>
> Ok, the card does not transmit the data.
> A few people reported this and I have absolutely no idea what's going on.
>
....well, there you go ...I am sane after all. Perhaps should someone put up a
little compatibility caveat on the b43 webpage, warning people that there are
issues with this brand/model of card that remain unresolved? Not to
worry....I'll just backtrack all this on the 32bit P4 box to make sure the
situation with that older slower hardware....and I guess it's off to the
computer shop on tuesday to buy some different cards...
...does ebay run 'give away' ads? ..ie; "Give Away ASUS WL-138G V2 wireless LAN
cards, PCI....suit linux software driver developer.." (hehe)
Thanks to all who replied and helped me out -- I'll monitor the list and
watch for developments. If you need me to try something out, just email me -
I'll be glad to help out if I can...
Kind regards,
Donald
_________________________________________________________________
It's simple! Sell your car for just $30 at CarPoint.com.au
http://a.ninemsn.com.au/b.aspx?URL=http%3A%2F%2Fsecure%2Dau%2Eimrworldwide%2Ecom%2Fcgi%2Dbin%2Fa%2Fci%5F450304%2Fet%5F2%2Fcg%5F801459%2Fpi%5F1004813%2Fai%5F859641&_t=762955845&_r=tig_OCT07&_m=EXT
_______________________________________________
Bcm43xx-dev mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
