On Wed, Oct 23, 2013 at 10:16 AM, Micka <[email protected]> wrote:
> Hi, I'm using the Ubuntu software from Robert Nelson.
Must not be the lastest version as, the top of the "3.8" branch on
beagleboard.org and my source script is:
+
+ bone_lcd7_cape_keys_00A3_pins: pinmux_bone_lcd7_cape_keys_00A3_pins {
+ pinctrl-single,pins = <
+ 0x040 0x2f /* KEY_LEFT gpmc_a0.gpio1_16, INPUT | PULLDIS | MODE7 */
+ 0x044 0x2f /* KEY_RIGHT gpmc_a1.gpio1_17, INPUT | PULLDIS | MODE7 */
+ 0x04c 0x2f /* KEY_UP gpmc_a3.gpio1_19, INPUT | PULLDIS | MODE7 */
+ 0x198 0x2f /* KEY_DOWN mcasp0_axr0.gpio3_16, INPUT | PULLDIS
| MODE7 */
+ 0x154 0x2f /* KEY_ENTER spi0_d0.gpio0_3, INPUT | PULLDIS | MODE7 */
+ >;
+ };
0x154...
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/groups/opt_out.
