On Wed, Oct 23, 2013 at 10:21 AM, Robert Nelson <[email protected]> wrote: > On Wed, Oct 23, 2013 at 10:16 AM, Micka <[email protected]> wrote: >> Hi, I'm using the Ubuntu software from Robert Nelson. > > > Must not be the lastest version as, the top of the "3.8" branch on > beagleboard.org and my source script is: > > + > + bone_lcd7_cape_keys_00A3_pins: pinmux_bone_lcd7_cape_keys_00A3_pins { > + pinctrl-single,pins = < > + 0x040 0x2f /* KEY_LEFT gpmc_a0.gpio1_16, INPUT | PULLDIS | MODE7 */ > + 0x044 0x2f /* KEY_RIGHT gpmc_a1.gpio1_17, INPUT | PULLDIS | MODE7 */ > + 0x04c 0x2f /* KEY_UP gpmc_a3.gpio1_19, INPUT | PULLDIS | MODE7 */ > + 0x198 0x2f /* KEY_DOWN mcasp0_axr0.gpio3_16, INPUT | PULLDIS > | MODE7 */ > + 0x154 0x2f /* KEY_ENTER spi0_d0.gpio0_3, INPUT | PULLDIS | MODE7 */ > + >; > + }; > > 0x154...
Yet again "3.8.13-bone20" strikes again... Would someone please delete the "armhf.com" image reference on the circuitco wiki? That image has not been update since June, and contains a kernel that is broken in so many ways it's a waste of time to support.. Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
