Everything I'm using is the dylan checkout. I have poky checked out: git clone git://git.yoctoproject.org/poky.git -b dylan
And with in there I have: The meta-beaglebone: git clone https://github.com/beagleboard/meta-beagleboard.git -b dylan & The meta-oe: git clone https://github.com/openembedded/meta-oe -b dylan I believe that's all I have. Let me know if you have any other issues. ~ Sayguh On Wed, Nov 13, 2013 at 11:38 AM, <[email protected]> wrote: > Hi! > > Can you post what versions of each layer you used? I'm trying to get the > process going as well. Thanks! > > ./m > > On Friday, October 25, 2013 7:36:59 AM UTC-7, [email protected] wrote: >> >> Just got back to this. >> >> Frank! That did it! Using the meta-beaglebone repository instead of the >> meta-ti repo fixed my issues. I still had to copy the device tree over but >> that's understandable. >> >> Thanks for all the help! >> >> >> On Friday, October 11, 2013 7:43:17 PM UTC-4, Frank Earl wrote: >>> >>> Don't use the meta-ti layer. It's got...issues... It sort-of works >>> with BeagleBone- but the meta-beaglebone one is the one they're using to >>> make the official images with from my current understanding. Works >>> correctly with Poky or Angstrom. >>> >>> >>> On Monday, October 7, 2013 7:17:03 AM UTC-6, [email protected] wrote: >>>> >>>> Step 1.) I followed this post to build Poky for the BBB: >>>> https://gist.github.com/errordeveloper/4056193 >>>> >>>> Step 2.) I followed this to setup the SD card: >>>> https://pixhawk.ethz.ch/tutorials/omap/boot_from_sd_sdhc >>>> >>>> Step 3.) I followed this for deploying my artifacts (MLO, u-boot, >>>> uImage & file system) >>>> https://pixhawk.ethz.ch/tutorials/omap/copy_sd_card >>>> >>>> I have also tried to swap out Step 2 above for the mkcard.txt script >>>> found here: >>>> http://downloads.angstrom-distribution.org/demo/beaglebone/ >>>> >>>> In all cases, I attempt to boot the BBB and I do not get anything over >>>> the HDMI display and nothing hits my routers DHCP server to receive an IP >>>> address. >>>> >>>> I do not have an FTDI Cable but can buy one if that is the logical next >>>> step in debugging. >>>> >>>> Any advice? Without an FTDI Cable, is there anyway to watch the boot >>>> process? >>>> >>>> Is the new Boot partition necessary (uImage, u-boot, MLO) or can I >>>> simply deploy the file system to the SD card? >>>> >>>> Sorry for the Newbie question! >>>> >>>> ~ Sayguh >>>> >>> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
