Hi! Can you post what versions of each layer you used? I'm trying to get the process going as well. Thanks!
./m On Friday, October 25, 2013 7:36:59 AM UTC-7, [email protected] wrote: > > Just got back to this. > > Frank! That did it! Using the meta-beaglebone repository instead of the > meta-ti repo fixed my issues. I still had to copy the device tree over but > that's understandable. > > Thanks for all the help! > > > On Friday, October 11, 2013 7:43:17 PM UTC-4, Frank Earl wrote: >> >> Don't use the meta-ti layer. It's got...issues... It sort-of works with >> BeagleBone- but the meta-beaglebone one is the one they're using to make >> the official images with from my current understanding. Works correctly >> with Poky or Angstrom. >> >> >> On Monday, October 7, 2013 7:17:03 AM UTC-6, [email protected] wrote: >>> >>> Step 1.) I followed this post to build Poky for the BBB: >>> https://gist.github.com/errordeveloper/4056193 >>> >>> Step 2.) I followed this to setup the SD card: >>> https://pixhawk.ethz.ch/tutorials/omap/boot_from_sd_sdhc >>> >>> Step 3.) I followed this for deploying my artifacts (MLO, u-boot, uImage >>> & file system) >>> https://pixhawk.ethz.ch/tutorials/omap/copy_sd_card >>> >>> I have also tried to swap out Step 2 above for the mkcard.txt script >>> found here: >>> http://downloads.angstrom-distribution.org/demo/beaglebone/ >>> >>> In all cases, I attempt to boot the BBB and I do not get anything over >>> the HDMI display and nothing hits my routers DHCP server to receive an IP >>> address. >>> >>> I do not have an FTDI Cable but can buy one if that is the logical next >>> step in debugging. >>> >>> Any advice? Without an FTDI Cable, is there anyway to watch the boot >>> process? >>> >>> Is the new Boot partition necessary (uImage, u-boot, MLO) or can I >>> simply deploy the file system to the SD card? >>> >>> Sorry for the Newbie question! >>> >>> ~ Sayguh >>> >> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
