Just got back to this. Frank! That did it! Using the meta-beaglebone repository instead of the meta-ti repo fixed my issues. I still had to copy the device tree over but that's understandable.
Thanks for all the help! On Friday, October 11, 2013 7:43:17 PM UTC-4, Frank Earl wrote: > > Don't use the meta-ti layer. It's got...issues... It sort-of works with > BeagleBone- but the meta-beaglebone one is the one they're using to make > the official images with from my current understanding. Works correctly > with Poky or Angstrom. > > > On Monday, October 7, 2013 7:17:03 AM UTC-6, [email protected] wrote: >> >> Step 1.) I followed this post to build Poky for the BBB: >> https://gist.github.com/errordeveloper/4056193 >> >> Step 2.) I followed this to setup the SD card: >> https://pixhawk.ethz.ch/tutorials/omap/boot_from_sd_sdhc >> >> Step 3.) I followed this for deploying my artifacts (MLO, u-boot, uImage >> & file system) >> https://pixhawk.ethz.ch/tutorials/omap/copy_sd_card >> >> I have also tried to swap out Step 2 above for the mkcard.txt script >> found here: >> http://downloads.angstrom-distribution.org/demo/beaglebone/ >> >> In all cases, I attempt to boot the BBB and I do not get anything over >> the HDMI display and nothing hits my routers DHCP server to receive an IP >> address. >> >> I do not have an FTDI Cable but can buy one if that is the logical next >> step in debugging. >> >> Any advice? Without an FTDI Cable, is there anyway to watch the boot >> process? >> >> Is the new Boot partition necessary (uImage, u-boot, MLO) or can I simply >> deploy the file system to the SD card? >> >> Sorry for the Newbie question! >> >> ~ Sayguh >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
