> > That said, based on your emails, I think you're successfully building > the kernel but you aren't getting it properly installed on your SD card > image. There are a variety of examples around to use as a starting > point, and if you're not able to copy a kernel to your boot image and/or > built a bootable SD card image from scratch, I'm wondering why you're > trying to build from source in the first place...
you are certainly right about it and I can answer 2 things: - copy anything is not a problem hopefully ;o) , but I didn't found out where to get the correct working uImage and dtb file from compilation script. - I'm ok to get a image already built for a 1st time. That being said after bouncing from the Robert's comment I've found Machinerykit and succeeded to build a working Xenomai image 2013/12/1 Don deJuan <[email protected]> > On 11/30/2013 04:23 PM, Charles Steinkuehler wrote: > > On 11/30/2013 4:30 PM, David Lewin wrote: > >> Thank you both, even although now it is unclear to me ( "Ah, use > Charles's > >> "MachineKit" image as is" is what I did ) > >> > >> I'll try to dig in the script to be able to build a xenomai on the BBB. > > "build a xenomai on the BBB" > > > > NOTE that I don't build the kernel or the images natively on a > > BeagleBone. They are both cross-compiled on a high-powered x86 machine > > with lots of RAM and very fast HDD (RAID). > > > > You _should_ be able to build on a BBB, but it will take a *LONG* time, > > and you'll need a bunch of swap enabled. > > > > That said, based on your emails, I think you're successfully building > > the kernel but you aren't getting it properly installed on your SD card > > image. There are a variety of examples around to use as a starting > > point, and if you're not able to copy a kernel to your boot image and/or > > built a bootable SD card image from scratch, I'm wondering why you're > > trying to build from source in the first place... > > > Or look into distcc as another option for building. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/-zyg4FrkMmY/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
