> > I'll try to dig in the script to be able to build a xenomai on the BBB.
This was more about to "build xenomai to *RUN *it on BBB" : the purpose, of course for me, is to cross-compile from my host PC. Btw, I don't have -yet- the BBB with quads A9, look for Udoo or wandboard instead... 2013/12/1 Robert Nelson <[email protected]> > On Sat, Nov 30, 2013 at 6:33 PM, Don deJuan <[email protected]> wrote: > > On 11/30/2013 04:23 PM, Charles Steinkuehler wrote: > >> On 11/30/2013 4:30 PM, David Lewin wrote: > >>> Thank you both, even although now it is unclear to me ( "Ah, use > Charles's > >>> "MachineKit" image as is" is what I did ) > >>> > >>> I'll try to dig in the script to be able to build a xenomai on the BBB. > >> "build a xenomai on the BBB" > >> > >> NOTE that I don't build the kernel or the images natively on a > >> BeagleBone. They are both cross-compiled on a high-powered x86 machine > >> with lots of RAM and very fast HDD (RAID). > >> > >> You _should_ be able to build on a BBB, but it will take a *LONG* time, > >> and you'll need a bunch of swap enabled. > >> > >> That said, based on your emails, I think you're successfully building > >> the kernel but you aren't getting it properly installed on your SD card > >> image. There are a variety of examples around to use as a starting > >> point, and if you're not able to copy a kernel to your boot image and/or > >> built a bootable SD card image from scratch, I'm wondering why you're > >> trying to build from source in the first place... > >> > > Or look into distcc as another option for building. > > Nah... quad core a9's with 2GB ram and fast sata drives work just fine. .;) > > Regards, > > -- > Robert Nelson > http://www.rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/-zyg4FrkMmY/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
