Hi There... Did anyone succeed running 3.2 from the epron on BBB?
I managed to run ubuntu with 3.2 on BBB but from sdcard only.. it cant see the eeprom.. not even as a storage. Any idea how to support it? I feel it could be a backport effort to the eprom driver... any help will be appreciated. Best Regards Mahammad On Thursday, December 12, 2013 8:34:23 PM UTC+2, Ali wrote: > > I have noticed that your are not supporting 3.2 kernel. > But Maxim mentioned that he was able to run your 3.2 kernel on the BBB. > That's why I was asking Maxim to provide me with the patched 3.2 kernel > that he was able to run on the BBB. > > On Thursday, December 12, 2013 8:26:51 PM UTC+2, RobertCNelson wrote: >> >> On Thu, Dec 12, 2013 at 12:24 PM, Ali <[email protected]> wrote: >> > Thanks Robert and Maxim. >> > I started again with a fresh git clone and was able to compile a new >> 3.2 >> > kernel. >> > >> > When I tried booting the compiled kernel on a BBB, it hits the >> following >> > error related to EEProm Configuration Option variable: >> > >> > ............................. >> > No daughter card found >> > [ 1.103912] at24 1-0050: 32768 byte 24c256 EEPROM, writable, 64 >> > bytes/write >> > [ 1.119110] Board config.name: >> > A335BNLT0A5C3513BBBK0428�������������������������������� >> > [ 1.127502] Board name: A335BNLT >> > [ 1.130889] Board version: 0A5C >> > [ 1.134155] SKU: ������ >> > [ 1.136718] The error message above indicates that there is an issue >> with >> > [ 1.136718] the EEPROM or the EEPROM contents. After verifying the >> > EEPROM >> > [ 1.136718] contents, if any, refer to the am335x_evm_setup function >> in >> > the >> > [ 1.136718] arch/arm/mach-omap2/board-am335xevm.c file to modify the >> > board >> > [ 1.136749] initialization code to match the hardware configuration >> > ............................. >> >> Laughs, no it's working perfectly, ! >> >> As previous stated, " I never added BBB support to my 3.2 based >> kernel, I consider 3.2 long dead." >> >> AKA: DO NOT USE my 3.2 branch on the BBB, use 3.8... >> >> Regards, >> >> -- >> Robert Nelson >> http://www.rcn-ee.com/ >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
