Hi Mahammad, Which 3.2 kernel you are using? And what version of Ubuntu?
On Tuesday, January 7, 2014 10:00:23 PM UTC+2, Mahammad wrote: > > Hi There... > > Did anyone succeed running 3.2 from the eMMC on BBB? > > I managed to run ubuntu with 3.2 on BBB but from sdcard only.. it can't > see the eMMC.. not even as a storage. 'lsblk' only shows the sdcard. Any > idea how to support the eMMC under kernel 3.2? I feel it could be a > backport effort to the eMMC driver... any help will be appreciated. > > Best Regards > > Mahammad > > > On Thursday, December 12, 2013 8:34:23 PM UTC+2, Ali wrote: >> >> I have noticed that your are not supporting 3.2 kernel. >> But Maxim mentioned that he was able to run your 3.2 kernel on the BBB. >> That's why I was asking Maxim to provide me with the patched 3.2 kernel >> that he was able to run on the BBB. >> >> On Thursday, December 12, 2013 8:26:51 PM UTC+2, RobertCNelson wrote: >>> >>> On Thu, Dec 12, 2013 at 12:24 PM, Ali <[email protected]> wrote: >>> > Thanks Robert and Maxim. >>> > I started again with a fresh git clone and was able to compile a new >>> 3.2 >>> > kernel. >>> > >>> > When I tried booting the compiled kernel on a BBB, it hits the >>> following >>> > error related to EEProm Configuration Option variable: >>> > >>> > ............................. >>> > No daughter card found >>> > [ 1.103912] at24 1-0050: 32768 byte 24c256 EEPROM, writable, 64 >>> > bytes/write >>> > [ 1.119110] Board config.name: >>> > A335BNLT0A5C3513BBBK0428�������������������������������� >>> > [ 1.127502] Board name: A335BNLT >>> > [ 1.130889] Board version: 0A5C >>> > [ 1.134155] SKU: ������ >>> > [ 1.136718] The error message above indicates that there is an >>> issue with >>> > [ 1.136718] the EEPROM or the EEPROM contents. After verifying the >>> > EEPROM >>> > [ 1.136718] contents, if any, refer to the am335x_evm_setup >>> function in >>> > the >>> > [ 1.136718] arch/arm/mach-omap2/board-am335xevm.c file to modify >>> the >>> > board >>> > [ 1.136749] initialization code to match the hardware configuration >>> > ............................. >>> >>> Laughs, no it's working perfectly, ! >>> >>> As previous stated, " I never added BBB support to my 3.2 based >>> kernel, I consider 3.2 long dead." >>> >>> AKA: DO NOT USE my 3.2 branch on the BBB, use 3.8... >>> >>> Regards, >>> >>> -- >>> Robert Nelson >>> http://www.rcn-ee.com/ >>> >> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
