Hi Ali.. I was using ubuntu 12.10: ubuntu-12.10-console-armhf-2013-04-26 Kernel is 3.2.0 that comes with chipsee capacitive 7"lcd. It is based on the TI sdk with a few changes to support the LCD on BBB.
Best Regards Mahammad On Wed, Jan 8, 2014 at 8:38 AM, Ali <[email protected]> wrote: > Hi Mahammad, > > Which 3.2 kernel you are using? And what version of Ubuntu? > > > On Tuesday, January 7, 2014 10:00:23 PM UTC+2, Mahammad wrote: >> >> Hi There... >> >> Did anyone succeed running 3.2 from the eMMC on BBB? >> >> I managed to run ubuntu with 3.2 on BBB but from sdcard only.. it can't >> see the eMMC.. not even as a storage. 'lsblk' only shows the sdcard. Any >> idea how to support the eMMC under kernel 3.2? I feel it could be a >> backport effort to the eMMC driver... any help will be appreciated. >> >> Best Regards >> >> Mahammad >> >> >> On Thursday, December 12, 2013 8:34:23 PM UTC+2, Ali wrote: >>> >>> I have noticed that your are not supporting 3.2 kernel. >>> But Maxim mentioned that he was able to run your 3.2 kernel on the BBB. >>> That's why I was asking Maxim to provide me with the patched 3.2 kernel >>> that he was able to run on the BBB. >>> >>> On Thursday, December 12, 2013 8:26:51 PM UTC+2, RobertCNelson wrote: >>>> >>>> On Thu, Dec 12, 2013 at 12:24 PM, Ali <[email protected]> wrote: >>>> > Thanks Robert and Maxim. >>>> > I started again with a fresh git clone and was able to compile a new >>>> 3.2 >>>> > kernel. >>>> > >>>> > When I tried booting the compiled kernel on a BBB, it hits the >>>> following >>>> > error related to EEProm Configuration Option variable: >>>> > >>>> > ............................. >>>> > No daughter card found >>>> > [ 1.103912] at24 1-0050: 32768 byte 24c256 EEPROM, writable, 64 >>>> > bytes/write >>>> > [ 1.119110] Board config.name: >>>> > A335BNLT0A5C3513BBBK0428�������������������������������� >>>> > [ 1.127502] Board name: A335BNLT >>>> > [ 1.130889] Board version: 0A5C >>>> > [ 1.134155] SKU: ������ >>>> > [ 1.136718] The error message above indicates that there is an >>>> issue with >>>> > [ 1.136718] the EEPROM or the EEPROM contents. After verifying >>>> the >>>> > EEPROM >>>> > [ 1.136718] contents, if any, refer to the am335x_evm_setup >>>> function in >>>> > the >>>> > [ 1.136718] arch/arm/mach-omap2/board-am335xevm.c file to modify >>>> the >>>> > board >>>> > [ 1.136749] initialization code to match the hardware >>>> configuration >>>> > ............................. >>>> >>>> Laughs, no it's working perfectly, ! >>>> >>>> As previous stated, " I never added BBB support to my 3.2 based >>>> kernel, I consider 3.2 long dead." >>>> >>>> AKA: DO NOT USE my 3.2 branch on the BBB, use 3.8... >>>> >>>> Regards, >>>> >>>> -- >>>> Robert Nelson >>>> http://www.rcn-ee.com/ >>>> >>> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/H2R8dCj8xyI/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
