Is it possible to get a same instructions list for the official one<http://git.xenomai.org/xenomai-2.6.git/tree/ksrc/arch/arm/patches/README> ?
Until now I was using your machinekit Charles, but I'd like to use my own Xenomai that I could change options (to add Traces, reduces latency, etc) .After getting the R. Nelson and checkout to 3.8 repo I'm lost to the next things to do . If it bothers you here, I can create a dedicated post however. PS if it can helps after successfully found how to do it I could put it on a doc that way nobody would ask anymore. Le lundi 3 février 2014 15:21:50 UTC+1, Charles Steinkuehler a écrit : > > On 2/2/2014 10:04 AM, t-szczyrba wrote: > > Dear sirs, > > > > I've done some work concerning porting ipipe patches to Robert Nelson > > 3.13-bone5 kernel. > > The patches & short descriptions how to apply are stored here: > > https://github.com/t-szczyrba/bbb-xenomai-patches > > > > Please read Robert C Nelson kernel installation documentation as well as > > xenomai installation documentation before playing with it, > > Very exciting, thanks for sharing! > > Keep us posted, I'm hoping at some point a Xenomai patched kernel with > SGX GPU support will be possible. You might also want to let the folks > on the Xenomai list know you're working on this, there may be someone > else trying to do something similar. > > -- > Charles Steinkuehler > [email protected] <javascript:> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
