If you're using my linux-dev repository, you need to check out the appropriate branch, master is not intended for actual use.
On 2/7/2014 8:48 AM, David Lewin wrote: > I've followed : > >> For the MachineKit Xenomai kernels it's very easy, and identical to >> working with Robert Nelson's kernels. You just work from my github >> repository instead of his (I've added the Xenomai patches to the >> laundry-list of BeagleBone patches his scripts apply): >> https://github.com/cdsteinkuehler/linux-dev >> You run the ./build_kernel.sh script, so the BeagleBone and Xenomai >> patches will be applied. You can then edit the configuration as desired >> and rebuild the kernel using tools/rebuild.sh > > > which may be wrong, but : > *git branch * > within linux-dev is correctly pointing to master. > > What did I've missed > > > 2014-02-07 Robert Nelson <[email protected]>: > >> >> >> >> On Fri, Feb 7, 2014 at 8:09 AM, David Lewin <[email protected]> wrote: >> >>> Charles, >>> My tries didn't succeeded, but I'm sure I've missed the good kernel : >>> I've flashed the >>> http://rcn-ee.net/deb/testing/2014-02-05/BBB-eMMC-flasher-debian-7.3-2014-02-05-2gb.img.xz >>> which could boot and run. >>> It use currently : 3.8.13-bone36 >>> I then build the linux-dev where /deploy/3.11.0-rc1-armv7-d1.zimage to >>> overwrite the bbb /boot/uboot >>> which lead me to a wrong boot : 4 leds fixed. >>> >>> Therefore, please where to get the correct kernel to swap from ? >>> >> >> If you built/installed "3.11.0-rc1-armv7-d1.zimage" then you didn't follow >> the directions posted, as that would have been the "master" branch of >> linux-dev.. >> >> Regards, >> >> -- >> Robert Nelson >> http://www.rcn-ee.com/ >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to a topic in the >> Google Groups "BeagleBoard" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/beagleboard/HqwuSu2tLe8/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> [email protected]. >> For more options, visit https://groups.google.com/groups/opt_out. >> > -- Charles Steinkuehler [email protected] -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
