Therefore, this would need to - git checkout to branch /3.8.13-bone36 as the emmc flasher kernel use this one - build_kernel.sh anew
is that right ? if yes, I couldn't retrieve where to set the branch to co. 2014-02-07 Charles Steinkuehler <[email protected]>: > If you're using my linux-dev repository, you need to check out the > appropriate branch, master is not intended for actual use. > > On 2/7/2014 8:48 AM, David Lewin wrote: > > I've followed : > > > >> For the MachineKit Xenomai kernels it's very easy, and identical to > >> working with Robert Nelson's kernels. You just work from my github > >> repository instead of his (I've added the Xenomai patches to the > >> laundry-list of BeagleBone patches his scripts apply): > >> https://github.com/cdsteinkuehler/linux-dev > >> You run the ./build_kernel.sh script, so the BeagleBone and Xenomai > >> patches will be applied. You can then edit the configuration as desired > >> and rebuild the kernel using tools/rebuild.sh > > > > > > which may be wrong, but : > > *git branch * > > within linux-dev is correctly pointing to master. > > > > What did I've missed > > > > > > 2014-02-07 Robert Nelson <[email protected]>: > > > >> > >> > >> > >> On Fri, Feb 7, 2014 at 8:09 AM, David Lewin <[email protected]> > wrote: > >> > >>> Charles, > >>> My tries didn't succeeded, but I'm sure I've missed the good kernel : > >>> I've flashed the > >>> > http://rcn-ee.net/deb/testing/2014-02-05/BBB-eMMC-flasher-debian-7.3-2014-02-05-2gb.img.xz > >>> which could boot and run. > >>> It use currently : 3.8.13-bone36 > >>> I then build the linux-dev where /deploy/3.11.0-rc1-armv7-d1.zimage to > >>> overwrite the bbb /boot/uboot > >>> which lead me to a wrong boot : 4 leds fixed. > >>> > >>> Therefore, please where to get the correct kernel to swap from ? > >>> > >> > >> If you built/installed "3.11.0-rc1-armv7-d1.zimage" then you didn't > follow > >> the directions posted, as that would have been the "master" branch of > >> linux-dev.. > >> > >> Regards, > >> > >> -- > >> Robert Nelson > >> http://www.rcn-ee.com/ > >> > >> -- > >> For more options, visit http://beagleboard.org/discuss > >> --- > >> You received this message because you are subscribed to a topic in the > >> Google Groups "BeagleBoard" group. > >> To unsubscribe from this topic, visit > >> https://groups.google.com/d/topic/beagleboard/HqwuSu2tLe8/unsubscribe. > >> To unsubscribe from this group and all its topics, send an email to > >> [email protected]. > >> For more options, visit https://groups.google.com/groups/opt_out. > >> > > > > > -- > Charles Steinkuehler > [email protected] > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/HqwuSu2tLe8/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
