On 5/23/14, 12:32 PM, "Robert Nelson" <[email protected]> wrote:
>On Fri, May 23, 2014 at 2:26 PM, Gerald Coley <[email protected]> >wrote: >> Yes, but understand, you will only get 500ma out of it before the PMIC >>shuts >> down depending on where the SW is currently set.I actually do not know >>on >> the new image. Best case it 800mA. > >I still have it do the "i2c mw 0x24 1 0x3e;" in u-boot during bootup.. >So whatever that sets up the PMIC for. If I¹m reading the data sheet correctly, IAC current limit 2,500mA IUSB current limit 1,300mA 0x3F would make iUSB current limit 1,800mA Regards, John > >Regards, > >-- >Robert Nelson >http://www.rcn-ee.com/ > >-- >For more options, visit http://beagleboard.org/discuss >--- >You received this message because you are subscribed to the Google Groups >"BeagleBoard" group. >To unsubscribe from this group and stop receiving emails from it, send an >email to [email protected]. >For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
