I think that is the 800mA setting in the PMIC over current circuitry. Gerald
On Fri, May 23, 2014 at 2:32 PM, Robert Nelson <[email protected]>wrote: > On Fri, May 23, 2014 at 2:26 PM, Gerald Coley <[email protected]> > wrote: > > Yes, but understand, you will only get 500ma out of it before the PMIC > shuts > > down depending on where the SW is currently set.I actually do not know on > > the new image. Best case it 800mA. > > I still have it do the "i2c mw 0x24 1 0x3e;" in u-boot during bootup.. > So whatever that sets up the PMIC for. > > Regards, > > -- > Robert Nelson > http://www.rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
