13000mA might be pushing it. Gerald
On Fri, May 23, 2014 at 2:52 PM, Gerald Coley <[email protected]>wrote: > I think that is the 800mA setting in the PMIC over current circuitry. > > Gerald > > > > On Fri, May 23, 2014 at 2:32 PM, Robert Nelson <[email protected]>wrote: > >> On Fri, May 23, 2014 at 2:26 PM, Gerald Coley <[email protected]> >> wrote: >> > Yes, but understand, you will only get 500ma out of it before the PMIC >> shuts >> > down depending on where the SW is currently set.I actually do not know >> on >> > the new image. Best case it 800mA. >> >> I still have it do the "i2c mw 0x24 1 0x3e;" in u-boot during bootup.. >> So whatever that sets up the PMIC for. >> >> Regards, >> >> -- >> Robert Nelson >> http://www.rcn-ee.com/ >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
