William, I'm not using any I/O at this time. Setting this up in steps. First was to get it running as a CUPS and weewx Server like my RasPi. I can 'play' with it later once it's stable. Found a cable on eBay for $6 shipped from CA using PL303HX claims 3.3v TTL.
Also, no resets since 3pm yesterday when I switched PS. Maybe there is a problem with the SuperPowerSupply model KZ0502000, although the other BBB (element14) was resetting using both PS (SPS and Garmin) and even a direct USB connection. It's possible that there was a problem with both the other BBB and the SPS power supply. If it's happy with the Garmin I'll get a different 5v2a supply. I am also solar but use a hybrid Grid-Tie Outback and a Manual Transfer Switch so when we lose power, it's dark until I can get to the switch. That's why I have all my electronics (cable modem, router, Vonage, etc on a UPS. On Sunday, September 14, 2014 5:40:23 PM UTC-4, William Hermans wrote: > > william@arm:~$ uptime > 14:38:02 up 4 days, 4:31, 1 user, load average: 0.04, 0.03, 0.05 > > And this is a small uptime. I've had it run for months at a time. Others > yet have had longer uptimes. > > One thing you have not mentioned, or at least i have not seen you mention > is if you're connecting anything on the IO pins. IF so, what. > > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
