Greg we are experiencing the same issues as well with reset not bringing up the eth0 interface. we were trying to do a hw watchdog that would reset the board and when we press reset the eth0 interface fails as well. We are also setting the interface config static in /etc/network/interfaces.
--Skjortan! On Tue, Sep 16, 2014 at 2:28 PM, Greg Kelley <[email protected]> wrote: > I just changed over to the Switching Power Supply and eth0 failed to come > up on boot. I hit the reset button and a reboot brought it up. So now it > seems there are eth0 issues as well as resets. Going from bad to worse. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/vgeh336p0P4/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
