I plan to address this on the Ethernet issue in the next revision of the board in the form of a GPIO based recovery mechanism that will allow SW to reset the Ethernet PHY.
Gerald On Tue, Sep 16, 2014 at 11:53 AM, Chris Morgan <[email protected]> wrote: > On Tue, Sep 16, 2014 at 11:42 AM, Thomas Olofsson <[email protected]> > wrote: > > Greg we are experiencing the same issues as well with reset not bringing > up > > the eth0 interface. we were trying to do a hw watchdog that would reset > the > > board and when we press reset the eth0 interface fails as well. We are > also > > setting the interface config static in /etc/network/interfaces. > > > > > > > > > > --Skjortan! > > > > On Tue, Sep 16, 2014 at 2:28 PM, Greg Kelley <[email protected]> > wrote: > >> > >> I just changed over to the Switching Power Supply and eth0 failed to > come > >> up on boot. I hit the reset button and a reboot brought it up. So now it > >> seems there are eth0 issues as well as resets. Going from bad to worse. > >> > >> -- > >> For more options, visit http://beagleboard.org/discuss > >> --- > > > I very much appreciate your efforts in looking at these issues. The > company I work for is planning to use a BBB in a commercial product, > after discussions with CircuitCo, and this issue has me a little bit > worried. We haven't had a wide enough scale usage to know if we are > seeing something similar here with the resets and eth0 issues. > > Looking forward to observing as you guys continue to work through this > stuff. > > Chris > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
