On Tue, Sep 16, 2014 at 11:42 AM, Thomas Olofsson <[email protected]> wrote: > Greg we are experiencing the same issues as well with reset not bringing up > the eth0 interface. we were trying to do a hw watchdog that would reset the > board and when we press reset the eth0 interface fails as well. We are also > setting the interface config static in /etc/network/interfaces. > > > > > --Skjortan! > > On Tue, Sep 16, 2014 at 2:28 PM, Greg Kelley <[email protected]> wrote: >> >> I just changed over to the Switching Power Supply and eth0 failed to come >> up on boot. I hit the reset button and a reboot brought it up. So now it >> seems there are eth0 issues as well as resets. Going from bad to worse. >> >> -- >> For more options, visit http://beagleboard.org/discuss >> ---
I very much appreciate your efforts in looking at these issues. The company I work for is planning to use a BBB in a commercial product, after discussions with CircuitCo, and this issue has me a little bit worried. We haven't had a wide enough scale usage to know if we are seeing something similar here with the resets and eth0 issues. Looking forward to observing as you guys continue to work through this stuff. Chris -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
