On Tue, Nov 25, 2014 at 8:14 AM, Marco Steger <[email protected]> wrote: > > Hi Robert, > thanks for your comments. >> >> Yes and No... It'll boot, but not everything will work, ... > > I'm not that sure about that. I just tried this and the BBB doesn't boot > afterwards. But maybe I did a bad mistake. Here my steps: > > 1.) Downloaded your DTB-rebuilder " > > git clone -b 3.14-ti https://github.com/RobertCNelson/dtb-rebuilder.git"; > > 2.) Uncommented line 53 (/* #include "am335x-bone-can1.dtsi" */) in file > dtb-rebuilder/src/arm/am335x-boneblack.dts. > 3.) make > 4.) copied the am335x-boneblack.dtb file to /boot/dtbs/3.16.1-bone4/ > 5.) Reboot. Without result. After running modprobe can; modprobe can-dev; > modprobe can-raw there was no CAN interface when typing ifconfig -a
Do you have can enabled? The can "pinmux" relies on this patchset in my v3.14.x tree: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-3.14.y/patches/beaglebone/pinmux-helper > 6.) So I checked the uEnv file in /boot dir. There was a line "#dtb=" > 7.) Then I uncommented this line and used > dtb=/boot/dtbs/3.16.1-bone4/am335x-boneblack.dtb Yuck, don't do that, just the file name.. (i need to add the exact path to the lookup function in u-boot so user's don't break their boot via ^^^^that^^^) > 8.) After reboot all 4 LEDs stay lid and after lets say 30 seconds its seems > that the board reboots again. > > What did I wrong here? Any ideas? > > In the meantime I will reflash my board and start again... :) Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
