Sorry, that was all I had. I don't know how to make post-capemgr stuff work, either (and barely understand how to make capemgr things work!).
> On Dec 26, 2014, at 21:19 , Thorsten von Eicken <[email protected]> wrote: > > On Friday, December 26, 2014 9:13:31 PM UTC-8, Rick M wrote: > Anything in dmesg? > > About? I don't see any errors or so. > # dmesg | egrep tty > [ 0.000000] Kernel command line: console=ttyO0,115200n8 fixrtc > capemgr.disable_partno=BB-BONELT-HDMI,BB-BONELT-HDMIN root=/dev/mmcblk0p2 rw > rootfstype=ext4 rootwait fixrtc > [ 2.525915] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88, base_baud > = 3000000) is a OMAP UART0 > [ 3.361270] console [ttyO0] enabled > [ 3.372171] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89, base_baud > = 3000000) is a OMAP UART1 > [ 8.610436] usb 2-1: pl2303 converter now attached to ttyUSB0 > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- Rick Mann [email protected] -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
