On Saturday, December 27, 2014 10:06:38 AM UTC-8, Charles Steinkuehler wrote: > > Also, if you've got a USB serial cable, you can pause the startup > sequence and poke around a bit with U-Boot to see what dtb file it's > trying to load. > I attached a serial cable, but it doesn't say anything useful. I guess it's too much asking for uboot to log what it's doing... ... SD/MMC found on device 1 reading uEnv.txt 678 bytes read in 5 ms (131.8 KiB/s) Importing environment from mmc ... gpio: pin 55 (gpio 55) value is 1 Checking if uenvcmd is set ... gpio: pin 56 (gpio 56) value is 1 Running uenvcmd ... mmc_send_cmd : timeout: No status update Card did not respond to voltage select! mmc0(part 0) is current device Card did not respond to voltage select! Card did not respond to voltage select! ** Bad device mmc 0 ** 3574064 bytes read in 620 ms (5.5 MiB/s) 31547 bytes read in 74 ms (416 KiB/s) Booting from mmc ... Kernel image @ 0x80200000 [ 0x000000 - 0x368930 ] ## Flattened Device Tree blob at 80f80000 Booting using the fdt blob at 0x80f80000 Using Device Tree in place at 80f80000, end 80f8ab3a
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
