On Sat, Dec 27, 2014 at 2:37 PM, Thorsten von Eicken <[email protected]> wrote: > After some debugging I found... > > I have to set fdtfile=am335x-boneblack-ttyO4.dtb in uEnv.txt, not dtb=... > uBoot loads the dtbs from /boot/dtbs, not from /boot/dtbs/`uname -r`, which > is where the dtb-rebuilder drops them > > I have uBoot 2013.07, maybe some of the info pertains to a newer version. > Not sure I want to go through the trouble of finding a newer version and > trying that... Dunno how to determine the uboot version on a running system > without rebooting with attached serial... > I hope this info helps someone else... But if you're at this level expect to > waste hours and hours troubleshooting...
Sorry, was home with family over Christmas break away from the internet. I changed this in July-August 2014, so if your image is prior to that: fdtfile= post dtb= The full spec of this change is documented here: http://elinux.org/Beagleboard:U-boot_partitioning_layout_2.0 Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
